[Asterisk-Users] Hangup Issues on TDM40B FXO Australia

[Mike Sander]

I had a similar issue both with the X100P clones and TDM400.

Both were fixed by enabling AU zone and the busydetect functions. Don't
forget a full asterisk reload needs to take place after changing Zap conf
files, not just a soft-reload. Best way is to reboot the computer.

Mike

> I have a similar issue.
>
> I have 2 pstn lines and a phone plugged into my tdm400.
> If I make a call to the outside using the phone, and the pstn number is
> engaged, and I hang up, the line is not freed. I have been restarting
> asterisk to get my external line back.
>
> This does not happen if I make the same call from my pc (using sj phone).
>
> Malcolm
>
> Haydn.Kemmery at lihir.com.pg wrote:
>
>>Afternoon all,
>>
>>After doing some test on my asterisk box I can successfully receive
>>calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
>>
>>Dial out from a sip phone is also not an issue, all calls connect and
>>terminate normally.
>>
>>If I call the Asterisk PBX say from PSTN in Zap1-1 and out through
>>ZAP2-2 back to the PSTN (after entering the correct pin off course) the
>>card does not appear to detect the hang-up, I then have to issues a soft
>>hang-up to close the call,
>>I presume this indicates the card is configured to receive the correct
>>hangup signal
>>
>>I have tried enabling callprogress, busydetect and a few settings on the
>>busycount but to no success
>>
>>I've also tried LS and KS signalling
>>
>>Does anyone else have any suggestions to get this to work with
>>Australia's Telstra?
>>
>>
>>
>>Regards
>>
>>Haydn
>>
>>
>>
>>
>>
>>
>>--------------------------------------------------------------------------------------------------------------------
>>This email and any files transmitted with it are confidential and
>>intended solely for the use of the individual or entity to whom
>>they are addressed.
>>If you have received this email in error please notify the
>>originator of the message. This footer also confirms that this
>>email message has been scanned for the presence of computer viruses.
>>
>>Any views expressed in this message are those of the individual
>>sender, except where the sender specifies and with authority,
>>states them to be the views of LMC.
>>
>>--------------------------------------------------------------------------------------------------------------------
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 266.11.15 - Release Date: 22/05/2005
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>