[Asterisk-Users] How to pass Asterisk -SIP- Cisco AS -H323- world ?

[Adam Rybak]

Hello,

    i know thats is * mailing list but maybe here are cisco guru's which can
help.

My network schema is:

Softphones <-SIP-> Asterisk <-SIP->\                /<-H323-> WORLD2
                                    > Cisco AS5350 <- E1 -> WORLD
(Phones <-> Traditional PBX <-E1->--/) - will be developed soon.

Communications beetween WORLD and softphones works well but i have an H323 link
to other site and i want to allow calling from softthones (in future from
Phones too) calling to the WORLD2.
I tried to add dialpeers but this doesnt work - all calls are routed via E1 to
WORLD.
This is part of my config:
! GK Config:
interface FastEthernet0/0
 ip address 192.168.X.X 255.255.255.0
 duplex auto
 speed auto
 h323-gateway voip interface
 h323-gateway voip id TGK1 ipaddr 194.X.X.X 1719
 h323-gateway voip h323-id MYID
!
gateway
! For World -> Softphones communication
dial-peer voice 14 pots
 incoming called-number 2323.
 direct-inward-dial
!
dial-peer voice 15 voip
 destination-pattern 2323.
 session protocol sipv2
 session target ipv4:192.168.X.X
 codec g711alaw
! For outgoing Softphones - World
dial-peer voice 1000 pots
 application session
 destination-pattern .T
 direct-inward-dial
 port 3/1:D
 forward-digits all
!

i tried to add
!
dial-peer voice 999 voip
 application session
 destination-pattern 0.
 target session ras
!

but all calls are still routed via dial peer 1000 - why ?

I want to pass all calls thru cisco becouse i need one point for billing for
asterisk and PBX calls and in future i need to make calls from PBX to the
WORLD2 destinantion.

PLEASE HELP!

Thanks,

Adam