[Asterisk-Users] Sipura 3000 Question

[Nathan C. Smith]

In the advanced options there are a few options for hang-up detection
including tone detection, and silence detection.  They also have parameters
to adjust timing and sensitivy.  IIRC, they are not enabled by default.


-----Original Message-----
From: Aldo Bergamini [mailto:aab.lists at nb-a.com] 
Sent: Friday, May 20, 2005 8:35 AM
To: Asterisk Users
Subject: [Asterisk-Users] Sipura 3000 Question



Dear list,

I am playing with Sipura 3000 since last week.

Through the wiki pages I could get running it reasonably well.

My setup is that of a Sipura, linked with a local analog cordless phone, a
local PSTN line and the setup to link to an asterisk server located at a
remote static ip address.

I can dial the cordless phone from other extensions located at the asterisk
server; I can dial out from the cordless phone trough the Sipura
- Asterisk link, using the PTSN line on the other port of the Sipura.

So far, so good.

BUT: While I can receive a phone call arriving on the PSTN port, it is
correctly routed to the cordless phone on the other spa port with the faked
callerid trick found in the wiki, the spa does not seems to detect the end
of the call.

So after the other party ends the call, I end up with an open SIP channel on
the asterisk server, and what is way worse, the SPA can not accept or dial
out any other call on the PSTN line. I have to manually reset it (and
restart the asterisk server to get rid of the zombie SIP channel).

The point is in other words how to setup the end of a call detection.

I assume that the phone line I am using is set up with italian (or european
/ etsi) standards. How should I setup the end of call detection for this
kind of pstn line?


Thanks for any help,

Aldo


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users