[Asterisk-Users] zaphfc troubles

[Peer Oliver Schmidt]

Nicolas Olivier wrote:

> I'm trying to setup a small BRI ISDN <-> voip gateway.
> The ISDN card is based on Cologne chipset, so I try set it up with zaphfc.
> 
> The versions i'm running:
> kernel-2.4.27
> Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e
> zaptel modules 1.0.7
> zaphfc is from bristuff-0.2.0-RC8e
> 
> When I'm doing the insmod on zaptel, zaphfc, zaprtc:
> 
> Zapata Telephony Interface Registered on major 196
> PCI: Found IRQ 12 for device 00:12.0
> zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo 0xc2d58000(0x2d58000) IRQ 12 HZ 100
> zaphfc: Card 0 configured for TE mode
> Registered Span 1 ('ZTHFC1') with 3 channels
> Span ('ZTHFC1') is new master
> zaphfc: 1 hfc-pci card(s) in this box.
> Registered Span 2 ('ZTRTC/1') with 0 channels
> Real Time Clock Driver v1.10e
> 
> I'm using zaprtc as the gateway is running on a VIA motherboard without USB controller.
[..]

Why are you running zaprtc? zaphfc provides your needed timing source.
-- 
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA