[Asterisk-Users] Installed ztdummy, Asterisk doesnt work anymore

[Jörg Steiner]

Michel Bachofen schrieb:

> Hi
>
> Since Im using the mISDN drivers and no zaptel stuff, I had to install 
> ztdummy to get MeetMe to work. Well, that was the plan. Now, after 
> getting the latest zaptel version over CVS (Im using Kernel 2.6), 
> uncommenting all the modules except ztdummy in zaptel.sysconfig file 
> and compiling this by "make", "make install" and "make linux26", I 
> rebooted and recompiled Asterisk with "make install" again. Before all 
> this, Asterisk worked perfectly fine, incoming and outgoing 
> connections worked, everything did its job (except the MeetMe of 
> course). But now I get the following errors when starting up Asterisk:
>
> [ Booting.....................Apr 19 11:07:28 WARNING[6237]: 
> chan_zap.c:9615 setup_zap: Ignoring switchtype
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> pridialplan
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> overlapdial
> Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9436 setup_zap: Unknown 
> signalling method 'bri_cpe_ptmp'
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> overlapdial
> Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9078 setup_zap: Signalling 
> must be specified before any channels are.
> Apr 19 11:07:28 WARNING[6237]: loader.c:345 ast_load_resource: 
> chan_zap.so: load_module failed, returning -1
> Apr 19 11:07:28 WARNING[6237]: loader.c:440 load_modules: Loading 
> module chan_zap.so failed!
>
> Now, I havent done anything to the zaptel.conf yet, Im not sure if I 
> even have to (didnt have that file before all this)?
>
> Looking forward to hearing anything in this matter :-(
>
> Michel
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
Hi Michael,
do you have compiled and installed libpri!?

Jörg