[Asterisk-Users] Is there a product to simulate a PRI trunk?

[Dey, Spondon, ALABS]

Rob,
That should work.....without a crossover though....
If you have an extra card and machine to dedicate for that purpose that
should suffice.
In theory it should work....i  have been tempted to try it but
haven't....
let me know the outcome if you do try it.
Thanks!!
Spondon




-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Robert
Goodyear
Sent: Friday, May 13, 2005 2:06 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Is there a product to simulate a PRI trunk?


Does anyone know of a way to simulate the signaling of a PRI trunk for 
testing/setup purposes? I realize this may be a rather naive question, 
but I was wondering if you could take a TE110, for example, and using a 
crossover cable (or not?) and some means of emulating the NI2 signaling 
protocol connect it to another TE110 on another machine to test and 
verify an installation before the telco comes out to provision our new 
trunks.

Regards,
/rg

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users