[Asterisk-Users] "Called" ID question - Trying again

[McQuiggan, Mark xt46480]

The question below was asked before, and bounced back to me...trying
again....

In the Avaya PBX, when a person calls a local extension within the PBX
network, the caller is provided with the called person's name on his/her
call display (I suppose that this could be called "Called ID"). For example,
if I called Joe Blow from my extension 46480 by dialling 41234, I would see
"Joe Blow - 41234" (the Called ID) on my call display after a pause, and Joe
would see "Mark McQuiggan - 46480".

Is this possible on Asterisk using SIP phones (x-ten Eyebeam or Polycom)? At
present, if I did the same as above on an Eyebeam, Joe Blow would see my
name and extension, but I would see 41234 at 10.10.10.10. All documentation
that I have read deals with Caller ID. Am I missing something?

Thanks,

Mark McQuiggan

_
This message and any attachments are intended only for the use of the addressee and
may contain information that is privileged and confidential. If the reader of the 
message is not the intended recipient or an authorized representative of the
intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/9fa6923d/attachment.htm