[Asterisk-Users] GR-303 zaptel and zapata configurations

[Michael B. Murdock]

Did you ever may any progress on this Chris?

I am also interested in figuring out how to configure the GR-303 as a CPE
device.

-- Mike

----- Original Message ----- 
From: "Chris A. Icide" <chris at netgeeks.net>
To: <asterisk-users at lists.digium.com>
Sent: Friday, April 29, 2005 1:32 PM
Subject: [Asterisk-Users] GR-303 zaptel and zapata configurations


>
> -----BEGIN PGP SIGNED MESSAGE-----
>
> Does anyone have any working example GR-303 configurations for zaptel
> and
> zapata conf?
>
> The information available on the wiki as well as in the sample
> configurations just doesn't seem to be enough to bridge the gap for
> me.
>
> In Zaptel.conf,
>
> Do you set up a GR-303 circuit like a PRI with b and d channels or do
> you
> set fxo or fxs, ks signalling?
> How do you configure the channels for the control and timing channels
> (12
> and 24 on a T1 from a 5ESS switch)?
>
> In zapata.conf,
>
> Trunk groups require 1 or more signalling channels, so this would
> indicate
> that you need to set up the circuits in zaptel as PRI?
>
> signalling can be gr303fxoks_cpe/net?
>
> Do you assign CRV's instead of channels, or do you assign channels
> and crv's?
>
>
> I would appreciate any help here.  I'm trying to set up an asterisk
> system
> as a GR-303 CPE device off of a 5ESS switch using 2 T1 circuits.
>
> - -Chris
>
> -----BEGIN PGP SIGNATURE-----
> Version: PGP 8.1
>
> iQCVAwUBQnJ91u0LTNca2q41AQEeXAQA5irA7dJYvLYR2xSIYl3E/dGklbBxR/k7
> n2AxrDfTQIwIAPDaSKZZp4VvCGL7fo6fT5Gvdhdu4tRWe9blqRV5GpdF/IpD/zVq
> h3XVvBn7xArJi6pK8Ed+pjFnqIbwszK+WpFYJQs0CLVAc+xdDJqrAsKNC0lfXmt7
> VPEl5dtxUJ4=
> =z9ey
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>