[Asterisk-Users] Inbound ANI & DNIS format

[Matt Loretitsch]

I believe *ANI*DNIS

That's how Asterisk sends it when I set my t1 line to featd.

In /etc/asterisk/zapata.conf
signalling=featd

not much to go on, but a little!
-Matt

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Adam
Robins
Sent: Thursday, May 12, 2005 9:44 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Inbound ANI & DNIS format

Hello,

Being totally fed up with the lack of quality and reliability from both
VoicePulse and BroadVoice,
We are switching to a direct IP connection to Global Crossing.  We've
installed a local point-to-point T1 into their CO, and they will
give/take SIP g729a directly and act as the gateway for us.

In setting up the inbound SIP service, they are asking the question, "In
what format do I want my ANI & DNIS presented?"  They provided examples,
such as "*ANI*DNIS", etc.

Does anyone out there know how Asterisk expects to see this information
on inbound calls?

Thanks,
Adam




The contents of this email message and any attachments are confidential
and are intended solely for addressee. The information may also be
legally privileged. This transmission is sent in trust, for the sole
purpose of delivery to the intended recipient. If you have received this
transmission in error, any use, reproduction or dissemination of this
transmission is strictly prohibited. If you are not the intended
recipient, please immediately notify the sender by reply email and
delete this message and its attachments, if any.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users