[Asterisk-Users] Problem with MeetMe

Chris listmail at odisok.net
Thu May 12 07:08:58 MST 2005 

It sounds like you don't have USB support compiled in the kernel.


Chris

----- Original Message ----- 
From: "Daniel Salama" <dsalama at user.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Wednesday, May 11, 2005 11:55 PM
Subject: Re: [Asterisk-Users] Problem with MeetMe


> Chris/BJ,
> 
> I am running REL3 with kernel 2.4.21-27.0.4.ELsmp. I enabled USB  
> devices in the BIOS. Here are the problems I'm seeing:
> 
> root at asterisk0: ~ > modprobe zaptel
> root at asterisk0: ~ > modprobe ztdummy
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,  
> including invalid IO or IRQ parameters.
>        You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb- 
> uhci.o failed
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod ztdummy failed
> 
> root at server0: ~ > lsmod
> Module                  Size  Used by    Not tainted
> zaptel                183104   0  (unused)
> soundcore               7044   0  (autoclean)
> iptable_filter          2412   0  (autoclean) (unused)
> ip_tables              16544   1  [iptable_filter]
> e1000                  77884   2
> floppy                 57552   0  (autoclean)
> sg                     37388   0  (autoclean)
> usbcore                81152   1
> ext3                   89992   2
> jbd                    55156   2  [ext3]
> 3w-9xxx               570016   3
> sd_mod                 13936   6
> scsi_mod              115240   2  [sg 3w-9xxx sd_mod]
> 
> root at server0: ~ > modprobe -r zaptel
> root at server0: ~ > modprobe usb-uhci
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,  
> including invalid IO or IRQ parameters.
>        You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb- 
> uhci.o failed
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod usb-uhci failed
> 
> root at server0: ~ > modprobe usb-ohci
> root at server0: ~ > modprobe zaptel
> root at server0: ~ > modprobe ztdummy
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,  
> including invalid IO or IRQ parameters.
>        You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb- 
> uhci.o failed
> /lib/modules/2.4.21-27.0.4.ELsmp/kernel/drivers/usb/host/usb-uhci.o:  
> insmod ztdummy failed
> 
> root at server0: ~ > lsmod
> Module                  Size  Used by    Not tainted
> zaptel                183104   0  (unused)
> usb-ohci               23176   0  (unused)
> soundcore               7044   0  (autoclean)
> iptable_filter          2412   0  (autoclean) (unused)
> ip_tables              16544   1  [iptable_filter]
> e1000                  77884   2
> floppy                 57552   0  (autoclean)
> sg                     37388   0  (autoclean)
> usbcore                81152   1  [usb-ohci]
> ext3                   89992   2
> jbd                    55156   2  [ext3]
> 3w-9xxx               570016   3
> sd_mod                 13936   6
> scsi_mod              115240   2  [sg 3w-9xxx sd_mod]
> 
> It still won't load ztdummy. I can't get usb-uhci to work. I read on  
> the wiki that ztdummy requires uhci. What's the difference between  
> ohci and uhci?
> 
> Thanks,
> Daniel
> 
> On May 11, 2005, at 9:16 PM, Chris wrote:
> 
> >     I forgot because I haven't moved to a 2.6 kernel.
> >
> >
> > Chris
> >
> >
> > ----- Original Message -----
> > From: "BJ Weschke" <bweschke at gmail.com>
> > To: "Asterisk Users Mailing List - Non-Commercial Discussion"  
> > <asterisk-users at lists.digium.com>
> > Sent: Wednesday, May 11, 2005 6:56 PM
> > Subject: Re: [Asterisk-Users] Problem with MeetMe
> >
> >
> >
> >> Only if you're on a 2.4 kernel. A 2.6 kernel doesn't require USB for
> >> it's timing source.
> >>
> >> On 5/11/05, Chris <listmail at odisok.net> wrote:
> >>
> >>>     Edit the Makefile for the zaptel drivers.   You will see two  
> >>> commented lines that say ztdummy.  Uncomment them and rebuild.
> >>> Once you install the rebuild, do a modprobe ztdummy and you  
> >>> should be good to go.   BTW, you do need an active USB for  
> >>> ztdummy to load.
> >>>
> >>>
> >>> Chris
> >>>
> >>> ----- Original Message -----
> >>> From: "Daniel Salama" <dsalama at user.net>
> >>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"  
> >>> <asterisk-users at lists.digium.com>
> >>> Sent: Wednesday, May 11, 2005 3:28 PM
> >>> Subject: Re: [Asterisk-Users] Problem with MeetMe
> >>>
> >>>
> >>>> I don't have any of those modules loaded. I don't have any digium
> >>>> cards so wcfxo and wcfxs won't load. When I do make clean; make
> >>>> install in /usr/src/zaptel, it doesn't build ztdummy. If I manually
> >>>> build ztdummy by running make zdummy.o and then try to insmod, it
> >>>> fails with a bunch of unresolved symbols. I think it may have to do
> >>>> with the fact that I don't have uhci support.
> >>>>
> >>>> I tried building zaprtc but when I do make load, it fails. dmesg
> >>>> shows rtc: I/O port 112 is not free.
> >>>>
> >>>> Any other ideas?
> >>>>
> >>>> Thanks,
> >>>> Daniel
> >>>>
> >>>> On May 11, 2005, at 3:41 PM, Chris wrote:
> >>>>
> >>>>
> >>>>>     No timing?    Do you have the wcfxo, wcfxs, or ztdummy loaded?
> >>>>>
> >>>>> ----- Original Message -----
> >>>>> From: "Daniel Salama" <dsalama at user.net>
> >>>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >>>>> <asterisk-users at lists.digium.com>
> >>>>> Sent: Wednesday, May 11, 2005 1:09 PM
> >>>>> Subject: [Asterisk-Users] Problem with MeetMe
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> I'm trying to configure some meet me rooms in asterisk 1.0.2  
> >>>>>> and I'm
> >>>>>> getting the following problem:
> >>>>>>
> >>>>>>      -- Executing MeetMe("SIP/3210-38a9", "0224|qM") in new stack
> >>>>>>    == Parsing '/etc/asterisk/meetme.conf': Found
> >>>>>> May 11 14:05:46 WARNING[20050]: chan_zap.c:757 zt_open: Unable to
> >>>>>> open '/dev/zap/pseudo': No such device or address
> >>>>>> May 11 14:05:46 ERROR[20050]: chan_zap.c:6687 chandup: Unable  
> >>>>>> to dup
> >>>>>> channel: No such device or address
> >>>>>> May 11 14:05:46 WARNING[20050]: app_meetme.c:227 build_conf:  
> >>>>>> Unable
> >>>>>> to open pseudo channel - trying device
> >>>>>> May 11 14:05:46 WARNING[20050]: app_meetme.c:230 build_conf:  
> >>>>>> Unable
> >>>>>> to open pseudo device
> >>>>>>      -- Playing 'conf-invalid' (language 'en')
> >>>>>>
> >>>>>> I have the following in meetme.conf
> >>>>>> [rooms]
> >>>>>> conf => 0224
> >>>>>>
> >>>>>> What could be happening? I don't have any digium cards on the
> >>>>>> machine. lsmod shows:
> >>>>>> Module                  Size  Used by    Not tainted
> >>>>>> zaptel                182080   0
> >>>>>>
> >>>>>> The other modules are not related to zaptel or asterisk.
> >>>>>>
> >>>>>> ls -l /dev/zap/ps* shows:
> >>>>>> crw-r--r--    1 root     root     196, 255 May 11 10:07 /dev/zap/
> >>>>>> pseudo
> >>>>>>
> >>>>>> Any ideas?
> >>>>>>
> >>>>>> Thanks,
> >>>>>> Daniel
> >>>>>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list