[Asterisk-Users] Problem with MeetMe

[Wiley Siler]

Go read the wiki.  Look for MeetMe.

Ztdummy will serve as a timing device for machines without Digium
hardware. 

Cheers,
W


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Daniel
Salama
Sent: Wednesday, May 11, 2005 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Problem with MeetMe

I have a feeling it has something to do with that as well. I would
really hate to having to install a digium card just for the timer
source. As I just posted on a earlier email, I even tried building
zaprtc but could not succeed. I think it may have something to do with
the fact that my stock kernel has RTC support built in. At the same
time, I'd rather stay away from building custom kernels.

Any other suggestions?

Thanks,
Daniel

On May 11, 2005, at 3:30 PM, John Dunham wrote:

> I believe it has to do with the fact that you may not have a Digum 
> card in your * server.  It uses it for timing.  We have several * 
> boxes and only one of them has the Digum card and therefore is where 
> the conference rooms all go to. We use IAX between the boxes and works

> across that connection, but the destination has to be on the unit with

> the Digium card.
>
> John Dunham
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Daniel 
> Salama
> Sent: Wednesday, May 11, 2005 1:09 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Problem with MeetMe
>
>
> I'm trying to configure some meet me rooms in asterisk 1.0.2 and I'm 
> getting the following problem:
>
>      -- Executing MeetMe("SIP/3210-38a9", "0224|qM") in new stack
>    == Parsing '/etc/asterisk/meetme.conf': Found May 11 14:05:46 
> WARNING[20050]: chan_zap.c:757 zt_open: Unable to open 
> '/dev/zap/pseudo': No such device or address May 11 14:05:46 
> ERROR[20050]: chan_zap.c:6687 chandup: Unable to dup
> channel: No such device or address
> May 11 14:05:46 WARNING[20050]: app_meetme.c:227 build_conf: Unable to

> open pseudo channel - trying device May 11 14:05:46 WARNING[20050]: 
> app_meetme.c:230 build_conf: Unable to open pseudo device
>      -- Playing 'conf-invalid' (language 'en')
>
> I have the following in meetme.conf
> [rooms]
> conf => 0224
>
> What could be happening? I don't have any digium cards on the machine.

> lsmod shows:
> Module                  Size  Used by    Not tainted
> zaptel                182080   0
>
> The other modules are not related to zaptel or asterisk.
>
> ls -l /dev/zap/ps* shows:
> crw-r--r--    1 root     root     196, 255 May 11 10:07 /dev/zap/ 
> pseudo
>
> Any ideas?
>
> Thanks,
> Daniel
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users