[Asterisk-Users] SIPURA SPA-2000 webserver dead after firmwareupgrade

[Bill Seddon]

<< Has anyone seen something like that and is there a fix?  A google
search didn't turn up any apparent hits.>>

I have seen exactly this problem.  Even IVR failed to work.  Got an RMA
from the supplier and they exchanged with no questions. 

Bill Seddon


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Prior
Sent: May 11, 2005 2:51 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] SIPURA SPA-2000 webserver dead after
firmwareupgrade

I just got a refurb Sipura SPA-2000 and was able to assign it an IP
address with DHCP and ping the device, but then I ran the firmware 
upgrade utility to bring it up to spa2k-2.0.13g which seemed to
work just fine, but after it rebooted I cannot connect to its
webserver for configuration.  I can still ping the unit.  When
I use the built in voice menu it reads back the right IP address,
webserver port, and claims the webserver is enabled, but I can't
connect to port 80 on the device and running the firmware upgrade
utility says that it cannot connect to the unit either.

Has anyone seen something like that and is there a fix?  A google
search didn't turn up any apparent hits.

Thanks
Steve
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users