[Asterisk-Users] E1 (Digium E100P) problem : B-channel succesfully restarted.

[Jairo Buendia]

Hi!
I have an Asterisk Box with one E1. This is connected
with PSTN. My problem is that periodically the
Asterisk console shows the following message.

-- B-channel 0/1 succesfully restarted on span 1
-- B-channel 0/2 succesfully restarted on span 1
-- B-channel 0/3 succesfully restarted on span 1
-- B-channel 0/4 succesfully restarted on span 1
-- B-channel 0/5 succesfully restarted on span 1
-- B-channel 0/6 succesfully restarted on span 1
-- B-channel 0/7 succesfully restarted on span 1
-- B-channel 0/8 succesfully restarted on span 1
-- B-channel 0/9 succesfully restarted on span 1
-- B-channel 0/10 succesfully restarted on span 1
-- B-channel 0/11 succesfully restarted on span 1
-- B-channel 0/12 succesfully restarted on span 1
-- B-channel 0/13 succesfully restarted on span 1
-- B-channel 0/14 succesfully restarted on span 1
-- B-channel 0/15 succesfully restarted on span 1
-- B-channel 0/16 succesfully restarted on span 1
-- B-channel 0/17 succesfully restarted on span 1
-- B-channel 0/18 succesfully restarted on span 1
-- B-channel 0/19 succesfully restarted on span 1
-- B-channel 0/20 succesfully restarted on span 1
-- B-channel 0/21 succesfully restarted on span 1
-- B-channel 0/22 succesfully restarted on span 1
-- B-channel 0/23 succesfully restarted on span 1
-- B-channel 0/24 succesfully restarted on span 1
-- B-channel 0/25 succesfully restarted on span 1
-- B-channel 0/26 succesfully restarted on span 1
-- B-channel 0/27 succesfully restarted on span 1
-- B-channel 0/28 succesfully restarted on span 1
-- B-channel 0/29 succesfully restarted on span 1
-- B-channel 0/30 succesfully restarted on span 1
-- B-channel 0/31 succesfully restarted on span 1

I have look for in the source code to check the
meaning  of this message but I haven't found anything.
The only thing that I could check, It's that T203=10
seg and T200=1 seg. For example, Cisco has T203=30
seg. 

In http://www.acacia-net.com/wwwcla/protocol/q921.htm
I  read the meaning of those timers. Could Asterisk
restart E1 because It don't recieve anything before
T203 finished?

My configuration is:

/etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

I don't know if this behavior is correct. Can someone
help me?

Thanks in advance.




		
______________________________________________ 
Renovamos el Correo Yahoo!: ¡250 MB GRATIS! 
Nuevos servicios, más seguridad 
http://correo.yahoo.es