[Asterisk-Users] Configuring SPA-3000 As A Trunk

[Chris Stenton]

Kerry,

The only problem with the config you have outlined is that if you stick an 
analogue phone onto the 3000 and get asterisk to route the trunked call back 
to that phone then about 50% of calls are dropped with an error when you 
answer the call. The only solution I have found is to configure the sipura 
3000 to use a call forwarding cludge that is outlined in the wiki.

Chris

----- Original Message ----- 
From: "Kerry Garrison" <kerryg at techdatapros.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
<asterisk-users at lists.digium.com>
Sent: Monday, May 09, 2005 5:18 PM
Subject: [Asterisk-Users] Configuring SPA-3000 As A Trunk


> We have just posted a review of the Sipura SPA-3000 with a complete setup
> guide for using the device as a trunk to Asterisk. It is easy to setup and
> works as good as any Zaptel setup and includes an ATA. It really is one 
> cool
> device!
>
> http://www.geekgazette.com/index.php?option=com_content
> <http://www.geekgazette.com/index.php?option=com_content&task=view&id=28>
> &task=view&id=28
>
>
> Kerry Garrison
> http://www.geekgazette.com
>


--------------------------------------------------------------------------------


> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users