[Asterisk-Users] Hardware Capacity/Configuration

[Daniel Salama]

I have most agents using Alaw and/or ulaw and a handful of agents using 
gsm.

Thanks,
- Daniel

On May 5, 2005, at 1:12 PM, Mehdi Chouikh wrote:

> If use Alaw or ulaw as codec, i think it's
> enough.
> But if you need to make transcoding to a hard codec like g729, g723,  
> you have to look other cpu.
>
> regards
> ----- Original Message ----- From: "Daniel Salama" <dsalama at user.net>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
> <asterisk-users at lists.digium.com>
> Sent: Wednesday, May 04, 2005 4:21 AM
> Subject: [Asterisk-Users] Hardware Capacity/Configuration
>
>
>> I know this is a frequent topic on the list. Sorry if this creates 
>> more bandwidth but I couldn't get my specific answer from neither the 
>> wiki nor searching the list.
>>
>> I've read that a P4 3GHz+ should be sufficient to handle a 4 T1s on a 
>> single CPU machine. I am setting up a proof of concept machine but I 
>> was only able to get a P4 1.6GHz machine. If this machine is only 
>> going to be "forwarding" the calls to another, much more powerful, 
>> Asterisk machine which will handle more demanding call processing 
>> rules, scripts, Monitoring, etc, do you think this CPU will be able 
>> to handle the 4 T1s? Will it handle 3? 2? 1? Efficiently, of course.
>>
>> The idea is to setup a basic VoIP gateway whose only intelligence 
>> will be to forward ALL incoming calls to another Asterisk box using 
>> IAX as well as placing outbound calls through the T1s from other 
>> Asterisk boxes communicating using IAX.
>>
>> Comments?
>>
>> Thanks,
>> Daniel
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users