[Asterisk-Users] TE410P Drops Calls after many touch tones fromcaller

[Barton Fisher]

well here is an example dial:

exten => 3732,3,Dial(ZAP/g2}/*${CALLERID}*${EXTEN}*)

But the logs really only show call hangup

Bart
  ----- Original Message ----- 
  From: Tim Connolly 
  To: 'Barton Fisher' ; 'Asterisk Users Mailing List - Non-Commercial Discussion' 
  Sent: Wednesday, May 04, 2005 9:18 PM
  Subject: RE: [Asterisk-Users] TE410P Drops Calls after many touch tones fromcaller - [SP]


  Do you have dial command in there with option t or T? What's the log say right before a call is "dropped" ?

   


------------------------------------------------------------------------------

  From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Barton Fisher
  Sent: Wednesday, May 04, 2005 11:13 PM
  To: Asterisk-Users at lists.digium.com
  Subject: [Asterisk-Users] TE410P Drops Calls after many touch tones fromcaller

   

  I have a TE410P card with two Telco T1's and two external IVR systems attached.  Calls from Telco are routed to proper IVR system based on DNIS (DID) received from Telco using a native bridge.

   

  T1's are D4 AMI SF

   

  Some IVR applications requires the caller to enter digits using their touch tone phone such as phone number. Not every time, but enough to be annoying asterisk drops the call after about 6 - 10 digits.  I've adjusted to busy count to 15 and turn off busy detect, but it still happens.  I removed asterisk and attach directly to IVR, it works.

   

  What I'd like to do is have asterisk only monitor the port for hang-up, not listen for touch tone if that's what causing the problem

   

  Any ideas to try would be appreciated

   

  Bart

  This message was check with eTrust Antivirus [undefined] and found virus free.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050504/5100b779/attachment.htm