[Asterisk-Users] Multitech SIP BRI Gateways

[Gregory Wiktor - ADCom Corp.]

Well, it was worth a try...

Gregory-
Currently our UNITS don't support 5ESS, but fully supports ETSI.  Our
Engineers are looking into having our unit supporting 5ESS but it won't
be ready until late this year.

If you have any more questions please get a hold of us.

Thank you,

Multi-Tech Systems
888.288.5470
www.multitech.com


-----Original Message-----
From: Gregory Wiktor - ADCom Corp. [mailto:gw at adcomcorp.com] 
Sent: Wednesday, May 04, 2005 4:01 PM
To: Multi-Tech Sales
Subject: RE: MVP410-ST


Hello Sales,
You mention you do not support 5ESS, do you mean your tech support dept
or does the unit not work with 5ess?

Thanks,
Greg 

-----Original Message-----
From: Multi-Tech Sales [mailto:sales at multitech.com] 
Sent: Wednesday, May 04, 2005 4:25 PM
To: Gregory Wiktor - ADCom Corp.
Subject: RE: MVP410-ST

Gregory-
It will work behind a NT1, therefore this will work.  Currently we don't
support 5EES, but it will support ETSI.

The MVP410ST will work for you, if you have any more questions get a
hold of the sales department.

Thank You,

Multi-Tech Systems
888.288.5470
www.multitech.com


-----Original Message-----
From: Gregory Wiktor - ADCom Corp. [mailto:gw at adcomcorp.com] 
Sent: Wednesday, May 04, 2005 1:07 PM
To: Multi-Tech Sales
Subject: RE: MVP410-ST


Hello Sales,
S/T is Fine, would it work behind an NT1?  My question about ESS5 is
because a lot of software for pci cards cannot handle 5ESS well, as ETSI
is more common.

Thanks,
Greg 

-----Original Message-----
From: Multi-Tech Sales [mailto:sales at multitech.com] 
Sent: Wednesday, May 04, 2005 10:02 AM
To: Gregory Wiktor - ADCom Corp.
Subject: RE: MVP410-ST

Gregory-
No, the MVP410ST will not work in the US. It is designed for
international use with the S type interface (4-Wire), the USA uses the N
type interface (2-Wire)and that is why it will not work.

If you have any more questions please contact the sales department. 

Thank You,

Multi-Tech Systems
888.288.5470
www.multitech.com


-----Original Message-----
From: Gregory Wiktor - ADCom Corp. [mailto:gw at adcomcorp.com] 
Sent: Wednesday, May 04, 2005 8:35 AM
To: Multi-Tech Sales
Subject: MVP410-ST


Hello Sales,
I am interested in your MVP410ST SIP Gateway, however my question is
does it support the USA?

I am using a 5ess bri connection to the pstn, and I need a gateway which
will work with spid's on Verizon 5ESS.

Thanks,
Gregory Wiktor
ADCOM Corp.