[Asterisk-Users] Voice Quality

[David]

Thanks for your reply...

I was told to disable the jitter if using trunk=yes in iax.conf..

Have you guys had any experince with having jiiterbuffer=yes and trunk=yes?


Thanks



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Boris Bakchiev
Sent: Wednesday, May 04, 2005 2:49 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Voice Quality

I would use g.729, and if this is an issue, GSM.
Setup trunking between both IAX peers so that you can save a lot of
bandwidth.



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- 
> bounces at lists.digium.com] On Behalf Of david at ccds.ca
> Sent: Wednesday, 4 May 2005 00:52
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Voice Quality
> 
> Hello,
> 
> I have setup two * servers and they are communicating using IAX. I'm 
> passing calls from SRV A (internet connection T1) to SRV B (internet
> connection: 512).
> 
> For some reasons I have an issue with the quality. The voice is a bit 
> scratchy. I have tried iLBC and SPEEX, but it didn't make any
difference.
> 
> Now, assuming that I have an issue with Bandwidth, what would be the
best
> way to configure my iax.conf. (A bit confused about jitterbuffer and
tos)
> 
> Here is my iax.conf @ location A:
> 
> [general]
> port=4569
> bandwidth=low
> disallow=all
> allow=ilbc
> ;allow=ulaw
> ;allow=speex
> jitterbuffer=200
> jitterbuffer=yes
> tos=lowdelay
> 
> and iax.conf @ location B:
> 
> [general]
> port=4569
> bandwidth=low
> disallow=all
> allow=ilbc
> ;allow=ulaw
> ;allow=speex
> jitterbuffer=200
> jitterbuffer=yes
> tos=lowdelay
> 
> [guest]
> type=user
> context=default
> callerid="Guest IAX User"
> disallow=all
> allow=ilbc
> 
> 
> Thanks guys
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


This message (and any associated files) is intended only for the use of the
individual or entity to which it is addressed and may contain information
that is confidential, subject to copyright or constitutes a trade secret. If
you are not the intended recipient you are hereby notified that any
dissemination, copying or distribution of this message, or files associated
with this message, is strictly prohibited. If you have received this message
in error, please notify us immediately by replying to the message and
deleting it from your computer. Messages sent to and from us may be
monitored... 

Internet communications cannot be guaranteed to be secured or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses. Therefore, we do not accept responsibility
for any errors or omissions that are present in this message, or any
attachment, that have arisen as a result of e-mail transmission. If
verification is required, please request a hard-copy version. Any views or
opinions presented are solely those of the author and do not necessarily
represent those of the company.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users