[Asterisk-Users] SIP over IAX2

[Daniel Salama]

Ok. I've been trying to make this work to no avail.

I think I have something screwed up in my original post, so I'm going 
to try to rephrase what I'm trying to do.

I have a bunch of agents connected to an * box using IAX (A1). I have a 
separate * box (A2) that is running an IVR (AGI) script that the agents 
need to get to. What I'm trying to do is create a extension in A1 so 
that when dialed by the agents, they will be connected to the IVR 
script in A2 using SIP (not IAX). I'm currently doing this using IAX, 
but I have to implement it using SIP, for the IVR machine is going to 
be SIP only in the near future.

Here is what I have in A1:

extensions.conf
exten => 
1234,1,Dial(IAX2/ivr_script:ivr_script at 192.168.1.1/s at ivr_script)
exten => 1234,2,HangUp

In A2, I have:

extensions.conf
[ivr_script]
exten => s,1,Answer
exten => s,2,AGI(play_ivr.pl)
exten => h,1,HangUp

If I simply change IAX2 to SIP in A1, it won't work. If I replace it 
with Dial(SIP/ivr_script at 192.168.1.1) it shows on the console:

Got SIP response 404 "Not Found" back from 192.168.1.1

which I could understand because there is no such SIP peer defined in 
sip.conf.

Any suggestions would be greatly appreciated.

Thanks,
Daniel

On Apr 30, 2005, at 8:00 PM, Tim Connolly wrote:

> Asterisk Box 2 (agents register)
> extensions.conf
> [agents-context]
> exten => 1234,1,Dial(SIP/${EXTEN}@ab1)
> exten => 1234,2,Hangup
>
> Asterisk Box 1
> Sip.conf
> [ab1]
> type=friend
> host=<ip of ab2>
> context=incoming
> canreinvite=yes
> qualify=yes
>
> extension.conf
> [incoming]
> Exten => 1234....etc...
>
> -----Original Message-----
> From: Daniel Salama [mailto:dsalama at user.net]
> Sent: Saturday, April 30, 2005 6:50 PM
> To: Tim Connolly
> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] SIP over IAX2
>
> I understand and I guess I know how to do that within a single box.
>
> If I have the following:
>
> Asterisk Box 1 (no agents)
> extensions.conf
> [test-ivr]
> exten => s,1,AGI(play_ivr)
> exten => s,2,Hangup
>
> Asterisk Box 2 (agents register)
> extensions.conf
> [agents-context]
> exten => 1234,1,Dial(?????)
> exten => 1234,2,Hangup
>
> Question is, when the agents dial 1234, how do I tell the application
> to connect to the agent with context test-ivr of Asterisk_1?
>
> Thanks,
> Daniel
>
> On Apr 30, 2005, at 7:12 PM, Tim Connolly wrote:
>
>> Maybe I'm missing something, but as long as you have the entension
>> defined
>> on the agent box to dial the extension on the IVR, you should be okay.
>> Just
>> make sure the default SIP context on the IVR has that extension
>> defined, or
>> define the IVR box as a SIP peer.
>>
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Daniel
>> Salama
>> Sent: Saturday, April 30, 2005 5:57 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [Asterisk-Users] SIP over IAX2
>>
>> I have two asterisk boxes. I'm running an IVR script in one of them 
>> and
>> I have agents registered on the second box.
>>
>> I wish to create an extension on the * box where the agents are
>> registered, so that when dialed, it will connect the agent to the IVR
>> script on the other * box. However, I'd like for the connection to be
>> done using SIP instead of IAX. Can anyone help me, if at all possible,
>> write this configuration?
>>
>> Thanks,
>> Daniel
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users