[Asterisk-Users] signaling table of E100P Digium Cards

[James Lin]

Hi all

I am trying to configure an E100P channel bank card.

The * will be connected to a PSTN switch with an E1 line. 

I am a bit confused with signaling table of E100P Digium Cards.

The signaling table of E100P Digium cards is each 64K channel's ABCD
bits which indicate the state for transmit signaling.

My problem now is where to find the CAS(Channel Associated Signalling)
signaling ABCD bit table ? (TxABCD, RxABCD)

How can I modify the ABCD value ?


Thanks for your help.


These are my system info:

[zaptel.conf]
# E100P card
span=1,0,0,cas,hdb3,crc4
fxoks=1-12
unused=13-15
unused=17-31
#
# Wildcard X100P card
fxsks=32
defaultzone=us
loadzone=us


[zapata.conf]
[channels]
musiconhold=default
signalling=fxo_ks
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
context=default
channel => 1-12 

language=en
signalling=fxs_ks
channel => 32


Output of zttool:
-
   Alarms          Span     
   OK              Digium Wildcard E100P E1/PRA Card 0
   OK              Wildcard X101P Board 1  


     Current Alarms:     No alarms.   
            Sync Source:        Internally clocked 
            IRQ Misses:               0
            Bipolar Viol:             0
            Tx/Rx Levels:         0/  0
            Total/Conf/Act:      31/ 12/  0 
                              1111111111222222222333
                     1234567890123456789012345789012
             TxA 000000000000
             TxB 111111111111
             TxC 000000000000
             TxD 111111111111
                                                         
             RxA 000000000000
             RxB 000000000000
             RxC 111111111111 
             RxD 000000000000 
-


[root at GW /]# lsmod
Module                  Size  Used by    Not tainted
wcfxo                   9376   0  (unused)
wct1xxp                13184   0  (unused)
zaptel                179168   0  [wcfxo wct1xxp]

[root at GW /]# cat /proc/interrupts
           CPU0
  0:      68392          XT-PIC  timer
  1:          4          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:     453361          XT-PIC  wcfxo
  5:       1048          XT-PIC  eth0
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  usb-ohci, usb-ohci, ehci-hcd
 10:     415190          XT-PIC  t1xxp
 12:         32          XT-PIC  PS/2 Mouse
 14:       5257          XT-PIC  ide0
 15:          0          XT-PIC  ide1
NMI:          0
ERR:          0

[root at GW /]# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3//CRC4

           1 WCT1/0/1 FXOKS
           2 WCT1/0/2 FXOKS
                 ...
          11 WCT1/0/11 FXOKS
          12 WCT1/0/12 FXOKS


--
James Lin