[Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?

[Hakem Taourchi]

Can this Dell run 90 calls simultaneously ? Or need a higher Dell
machine?
 
 
-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Ariel
Batista
Envoyé : samedi 23 avril 2005 1:27
À : 'Ben Hencke'; 'Asterisk Users Mailing List - Non-Commercial
Discussion'
Objet : RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
 
I just setup a SC420 with two TDMO4b cards in it and it works just fine.
No problems what so ever with it so far.
 
  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ben Hencke
Sent: Friday, April 22, 2005 6:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
 
I have head that the SC prefixed Dells are not good to use with Digium
hardware. Considering how picky my TE405P cards were in other low end
Dell servers, I would suggest using an 1850 instead.

OTOH, if it does work, please let me know :-)
If you go to small biz, you can get the SC1425 trimmed down with dual
2.8hgz for under $1k
- Ben
On 4/22/05, Greg Boehnlein <damin at nacs.net> wrote:
Hello,
        I've been asked to build a couple of Gateway servers for a
client
w/ TE405P hardware, and have been looking around at various 1U options.
I've been looking at SuperMicro and Tyan barbones boxes as possible 
platforms, but then was directed to Dell's SC1425 by a friend. Short
story, is that you can purchase a 2x3.0Ghz/1GigDDR400/1xSATA box in a 1U
form factor for $1,498.00. This seems almost too good to be true, so I'm

asking if anyone has had any experience with this box?

I'm not up on my PCI terminology, but as I understand it, the TE405P can
only be used in a 32 bit 33Mhz slot at 5.0 Volts. This SC1425 lists a
"1x 64-bit/1xxMHz PCI-X slot" under it's expandability information. I'd 
venture to guess this is probably NOT going to work with a TE405P.

That being said, if it works, great. If not, what 1U boxes are people
using IN PRODUCTION w/ TE405P cards?

--
    Vice President of N2Net, a New Age Consulting Service, Inc. Company 
         http://www.n2net.net Where everything clicks into place!
                             KP-216-121-ST

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050501/fa6a2919/attachment.htm