[Asterisk-Users] With a phone system.

[Wiley Siler]

Start here...
http://asteriskathome.sourceforge.net
 
Find a lnk to AMP
http://amp.coalescentsystems.ca/
 
All you need to get going is to got to the http://<machine IP>  then go
to AMP.
 
W
 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeffrey
Sharpe
Sent: Tuesday, March 29, 2005 2:08 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] With a phone system.



Ok, I feel just plain stupid now, what section and where?

 

 


Jeffrey 



________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Tuesday, March 29, 2005 2:46 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] With a phone system.

 

Read teh seciton covering AMP

 

W

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeffrey
Sharpe
Sent: Tuesday, March 29, 2005 1:43 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] With a phone system.

I was looking thru the archives and did not see anything, might not have
looked far enough back.

 

I installed Asterisk at Home 0.7 today, and connected it to an analog port
of our phone system.  Using extension 200 and SIPphone lite I can get
incoming calls, problem is reaching the other extensions on the phone
system that I am connected to and also dialing outgoing calls.  The
phone system requires that I dial 9 for an outside line, so how do I
setup my dial plan?  Any help with this would be appreciated.

 

Thanks,

Jeff.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050329/2f1c3817/attachment.htm