[Asterisk-Users] No D-channels available!
Rikard Westlund
rikard.westlund at ipnett.se
Tue Mar 29 06:08:20 MST 2005
Hi all,
I´ve ran into a problem regarding D-channels. I have setup Asterisk (CVS-HEAD-03/21/05-16:41:57) on RH Fedora Core 3(2.6.10-1.770_FC3) I also have a digium wcte11xp card for connetivity to the PSTN(E1). When I start zttool i see that Current Alarms changes between Recovering and Blue Alarm/Recovering.
I started to see these problems after i moved the digiumcard from one PCI slot to another, this was to solve a IRQ missmatch.
Please let me know if you need anymore info
Best regards
Rikard Westlund
My zaptel.conf looks like this:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
loadzone = se
defaultzone=se
This is the output from lsmod:
Module Size Used by
wcte11xp 40096 0
zaptel 204676 1 wcte11xp
md5 4033 1
ipv6 231681 12
autofs4 23493 0
sunrpc 156325 1
dm_mod 55637 0
i2c_i801 8141 0
i2c_core 20801 1 i2c_i801
hisax 517149 0
crc_ccitt 2113 2 zaptel,hisax
isdn 131905 1 hisax
slhc 6849 1 isdn
tg3 84933 0
floppy 57841 0
ext3 116297 3
jbd 69977 1 ext3
This is from /var/log/messages
Mar 29 14:19:18 sepbx kernel: PCI: Assigned IRQ 9 for device 0000:03:01.0
Mar 29 14:19:18 sepbx kernel: Controller version: 24
Mar 29 14:19:18 sepbx kernel: FALC version: 00000000
Mar 29 14:19:18 sepbx kernel: TE110P: Setting up global serial parameters for E1 FALC V1.2
Mar 29 14:19:18 sepbx kernel: TE110P: Successfully initialized serial bus for card
Mar 29 14:19:18 sepbx kernel: Found a Wildcard: Digium Wildcard TE110P T1/E1
Mar 29 14:19:18 sepbx kernel: Registered tone zone 16 (Sweden)
Mar 29 14:19:18 sepbx kernel: TE110P: Span configured for CCS/HDB3/CRC4
Mar 29 14:19:18 sepbx kernel: Calling startup (flags is 4099)
Mar 29 14:19:18 sepbx kernel: TE110P: Span configured for CCS/HDB3/CRC4
Mar 29 14:19:18 sepbx kernel: Calling startup (flags is 4099)
Mar 29 14:19:18 sepbx kernel: Registered tone zone 16 (Sweden)
Mar 29 14:19:18 sepbx zaptel: Running ztcfg: succeeded
Mar 29 14:19:19 sepbx kernel: NMF workaround on!
Mar 29 14:19:19 sepbx kernel: wcte1xxp: Setting yellow alarm
This is from more /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS/CRC4 RECOVERING
1 WCT1/0/1 Clear
2 WCT1/0/2 Clear
3 WCT1/0/3 Clear
4 WCT1/0/4 Clear
5 WCT1/0/5 Clear
6 WCT1/0/6 Clear
7 WCT1/0/7 Clear
8 WCT1/0/8 Clear
9 WCT1/0/9 Clear
10 WCT1/0/10 Clear
11 WCT1/0/11 Clear
12 WCT1/0/12 Clear
13 WCT1/0/13 Clear
14 WCT1/0/14 Clear
15 WCT1/0/15 Clear
16 WCT1/0/16 HDLCFCS
17 WCT1/0/17 Clear
18 WCT1/0/18 Clear
19 WCT1/0/19 Clear
20 WCT1/0/20 Clear
21 WCT1/0/21 Clear
22 WCT1/0/22 Clear
23 WCT1/0/23 Clear
24 WCT1/0/24 Clear
25 WCT1/0/25 Clear
26 WCT1/0/26 Clear
27 WCT1/0/27 Clear
28 WCT1/0/28 Clear
29 WCT1/0/29 Clear
30 WCT1/0/30 Clear
31 WCT1/0/31 Clear
When I start Asterisk(asterisk -vvvvvvvvvc) I get this:
Mar 29 15:02:15 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:17 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:18 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:19 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:21 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:22 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:23 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:25 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:26 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:27 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:29 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:31 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:32 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:34 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:35 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
== Primary D-Channel on span 1 down
Mar 29 15:02:36 WARNING[4557]: chan_zap.c:2049 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
This is from /proc/interrupts
CPU0
0: 2373144 XT-PIC timer
1: 8 XT-PIC i8042
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
9: 2315535 XT-PIC t1xxp
10: 46848 XT-PIC eth0
14: 5535 XT-PIC ide0
15: 21104 XT-PIC ide1
NMI: 0
ERR: 0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050329/a8e2bba1/attachment.htm
More information about the asterisk-users
mailing list