[Asterisk-Users] Re: Zaptel based timing for VoIP-only Asterisk

[Tony Mountifield]

In article <34F1B1EDB3E7B04C9A282FE3537FC49F141AA6 at mail.ritstele.com>,
Andreas Sikkema <andreas.sikkema at ritstele.com> wrote:
> Hi,
> 
> In a VoIP only environment, Asterisk has to use ztdummy 
> to have any chance of playing back understandable audio 
> files (without drops, hickups etc). 
> 
> I have been using ztdummy to some degree of success, but 
> I also have a "Wildcard TDM400P REV E/F Board 1" in the 
> Asterisk machine I'm using. I'm not using this card for 
> anything at all, but I'm wondering how to set it up for 
> timing only. What do I have to do (I have no experience 
> at all with zap channels and the zaptel.conf file)?

Just make sure the zaptel.conf file is set up correctly for
the combination of FXS/FXO modules you have, and that the
driver is successfully loaded.

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org