[Asterisk-Users] Cisco 7940 and multiple simultaneous calls

[Henry Devito]

I got it working,  Just a simple typo.
----- Original Message ----- 
From: "C F" <shmaltz at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Monday, March 28, 2005 3:57 PM
Subject: Re: [Asterisk-Users] Cisco 7940 and multiple simultaneous calls


> On Mon, 28 Mar 2005 10:31:56 -0600, Henry Devito <hdevito at mchsi.com> 
> wrote:
>> Hate to bring up an old thread.  I just configured a 7960 with multiple
>> lines appearing.  Each defined the same, but the buttons don't seem to 
>> roll
>> over.  What else do I have to define to do this.
>>
> Well it works for me and many others, so obviously..........
> So lets begin:
> 1. I found out (the hard way), that if you configure button 1 with sip
> account a, and button 2 with sip account b, then you can't try this
> (using sip account a) on button 3, it has to be in order (I didn't
> design it).
> 2. Make sure call waiting is disabled, although some suggested that it
> is not required, since you are asking me, and this is how I have it
> setup, and I never tested it any other way, give it a try.
> 3. Sometimes if you use the buttons on the phone and not TFTP to
> configure the phone, you might mistake what parameteres to match to
> the first button, therefore try making everything the same if
> possible.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users