[Asterisk-Users] 8 channel fxo setup outgoing call problem

[Goutam Shaw]

Do you have ATI FXO daughter cards. We had experienced similar problems.
After replacing the ATI with Digium X100M Rev B daughter cards the system
has been running fine.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Mike Flynn
Sent: March 28, 2005 3:05 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] 8 channel fxo setup outgoing call problem

I have an eight channel fxo setup (2 TDM400P cards) and I have them setup.
Here are my configs:

Zaptel.conf:

fxsks=1-8
loadzone=us
defaultzone=us

Zapata.conf:

[trunkgroups]

[channels]

musiconhold=default
rxwink=300  ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callerid=xxxxxx
callwaiting=yes
busydetect=no
callprogress=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=0.0

group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=incoming
faxdetect=no

signalling=fxs_ks
callerid=asreceived
context=from-pstn
channel=>1-8
Now calling in is no problem, all the channels pick up the incoming call
just fine.  However, for some reason, calling out does not work.

When I dial out (I have a default trunk setup) I get this on the console:

    -- Executing Macro("SIP/201-1d90", "dialout-default|636399xxx") in new
stack
    -- Executing GotoIf("SIP/201-1d90", "1?4") in new stack
    -- Goto (macro-dialout-default,s,4)
    -- Executing GotoIf("SIP/201-1d90", "1?6") in new stack
    -- Goto (macro-dialout-default,s,6)
    -- Executing Dial("SIP/201-1d90", "ZAP/g0/6363997681") in new stack
    -- Called g0/636399xxxx
    -- Zap/1-1 answered SIP/201-1d90

But it doesn't answer, nothing rings (locally or on my cellphone, the test
number I'm calling out to) it just says "connected" on the local phone but
its not actually connecting.  This problem is very weird because as of 5
hours ago, I only had 1 TDM400P card and 1 FXO chip and I could make
outgoing calls with no problems at all.

P.S.
I have checked the phone line I'm testing this on and it is fine.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050328/bb7b60d9/attachment.htm