[Asterisk-Users] Re: Asterisk as Cisco Call-Manager - dial out to PSTN

[Maron Kristófersson]

Hi Mario.

What kind of Cisco gateway are you using, I swapped an Cisco Call 
Manager 4.0 for Asterisk, and am using 12 gateways worldwide for PSTN 
access.  However using SIP, which the gateways (Call Manager Express on 
1760 routers) support very well for trunking.

I've found that H323 is even buggy between the CME gateways from Cisco.

Regards,

Maron Kristofersson

Mario Spendier wrote:
> Hi all,
> 
>  
> 
> I’m running Asterisk since two days, and it’s really one of the phatest 
> software available on the net!!! Respect!!! I have connected Asterisk as 
> a call manager for a cisco gatekeeper. Everything works fine internal, 
> but if I want to ring to a PSTN over another call manager, which is 
> connected over ISDN, I get the following output. Has anyone experience 
> in this or can help me? I’m running against closed doors in this 
> problem!!! If I phone over a Cisco call manager it works, so the failure 
> is Asterisk based.
> 
>  
> 
> -- Executing NoOp("SIP/12345-454d", ""call for "XXXX") in new stack
> 
>     -- Executing Dial("SIP/12345-454d", "OH323/ XXXX ") in new stack
> 
>     -- H.323 call to XXXX with codec alaw
> 
>     -- Called XXXX
> 
>     -- H.323 call 'ip$localhost/27230' cleared, reason 24 (Call ended 
> with Q.931 cause)
> 
>     -- Hungup 'OH323/L27230'
> 
>  
> 
> Thanks a lot!!!
> 
>  
> 
> Mario
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users