[Asterisk-Users] TDM01B

[Russell Handorf]

Thanks!

I've edited /etc/zaptel.conf to be
fxoks=4

and then ran

root at tmp:~# more /proc/interrupts
           CPU0       CPU1      
  0:      59746      18994    IO-APIC-edge  timer
  1:          8          0    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 17:         42          1   IO-APIC-level  eth1
 18:       1568         75   IO-APIC-level  aic7xxx, aic7xxx
 19:        920          0   IO-APIC-level  uhci_hcd, eth0
NMI:          0          0
LOC:      78599      78598
ERR:          0
MIS:          0
root at tmp:~# modprobe wcfxo
ZT_CHANCONFIG failed on channel 4: No such device or address (6)
FATAL: Error running install command for wcfxo
root at tmp:~# more /proc/interrupts
           CPU0       CPU1      
  0:      68597      18994    IO-APIC-edge  timer
  1:          8          0    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 17:         42          1   IO-APIC-level  eth1
 18:       1710         75   IO-APIC-level  aic7xxx, aic7xxx
 19:       1112          0   IO-APIC-level  uhci_hcd, eth0
NMI:          0          0
LOC:      87452      87451
ERR:          0
MIS:          0
root at tmp:~# ztcfg -vvv

Zaptel Configuration
======================
Channel map:
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
1 channels configured.
ZT_CHANCONFIG failed on channel 4: No such device or address (6)



I guess my hunch of the system not seeing the card might be the right track.

administrator tootai wrote:

> Russell Handorf a écrit :
>
>> Greetings all,
>> I addressed the issue below with editing the .config file in my 
>> 2.6.10 source file by adding
>> CONFIG_CRC_CCITT=m
>>
>> recompiled, and now I can modprobe wcfxs and zaptel without any 
>> errors, and ztctl -vvv shows
>> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
>
> You have an fxo module: so it's wcfxo (stable branch) that you have to 
> load (wctdm if you're using CVS)