[Asterisk-Users] Re: [Asterisk-Dev] Openloop disconnect?

[David Hill]

I fixed the problem by uncommenting the line #define ZERO_BATT_RING in 
wcfxo.c in zaptel-1.0.4.
And by changing the battery debounce time by modifying those lines: 
#define BATT_DEBOUNCE   700             /* Battery debounce (in ms) */
I compiled back zaptel, reloaded the modules and voila!  It is now 
working.  It is FINALLY detecting the ring/hangup EVEN when in voicemail.

Now, I still need to figureout why maxsilence and silencethreshold isn't 
working.

:)

Oh and by the way, the wildcard x100p was sharing an irq with an 
ethernet adapter so I switch them to different PCI slots and now it is 
on it's own IRQ.

Thank you for your discussion... it was entertaining.

Dave




David Hill wrote:

> Hello there,
>
>   I tried to found documentation about openloop disconnect on 
> Asterisk/Zaptel.  And up to now, I didn't find anything.  Is openloop 
> disconnect supported by zaptel/wcfxo drivers?
>
>   Other question: maxsilence and silencethreshold don't seem to have 
> any effect on voicemail.  Could it be possible that in certain 
> situation it just wont work?  I tried adding some verbose in app.c to 
> have the totalsilent variable printed out and it remains a 0 forever.
>
>   Finaly, does callprogress=yes should be working down here in 
> Canada?   Actually, everything seems to be broken (the wildcard x100p 
> or the zaptel drivers plus a combination of many libraries/etc).
>
>
> Thank you for your quick answer,
>
> Dave
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>
>