[Asterisk-Users] DTMF tones not working

[Courtney Couch]

I'll be damned. thats it.

I have no clue what I had before that made it work.  I pulled that 
config right off of a site that said it would work like this.  Changing 
[202] on the first one to [202-out] and boom it works.

thanks a bunch for pointing out the obvious.

MF Hulber wrote:

> Is it correct to have the same context (202) listed twice in sip.conf?
>
> Courtney Couch wrote:
>
>> I have Polycom ip-300 phones that worked yesterday but dont seem to 
>> work today (at least dtmf signalling once connected to the asterisk box)
>>
>> The current configuration is:
>>
>> [general]
>> port = 5060
>> bindaddr = 0.0.0.0
>> context = test
>> srvlookup = yes
>> dtmf = inband
>> allow = all
>> dtmfmode=inband
>> progressinband=no
>> disallow=all
>> allow=ulaw
>> pedantic=no
>>
>> [202]
>> type=user
>> secret=xxxx
>> context=test
>> mailbox=202
>> host=dynamic
>>                                                                                                                                      
>>
>> [202]
>> type=peer
>> context=test
>> secret=xxxx
>> dtmfmode=rfc2833
>> username=Bob
>> disallow=all
>> allow=ulaw
>> progressinband=no
>> host=dynamic
>> mailbox=202 up contacts in a database. Click on Web Address Book
>> callerid="Bob" 202
>> host=dynamic
>>
>> and in extensions:
>>
>> [test]
>> exten => s,1,Answer()
>> exten => s,2,Backtround(menu)
>> exten => s,3,Hangup()
>> exten => 2,1,Playback(success)
>> exten => 2,2,Goto(test,s,1)
>>
>> (test context created specifically so i can test this dtmf problem)
>>
>> Then in the console here is what I see:
>>
>> Executing Answer("SIP/201-3db8", "") in new stack
>> Launching 'BackGround'
>>    -- Executing BackGround("SIP/202-3db8", "menu") in new stack
>> Set channel SIP/201-3db8 to write format gsm
>>    -- Playing 'menu' (language 'en')
>> Urgent handler
>> Sending dtmf: 51 (3), at 192.168.0.101
>> Sending dtmf: 50 (2), at 192.168.0.101
>> Sending dtmf: 52 (4), at 192.168.0.101
>> Sending dtmf: 49 (1), at 192.168.0.101
>> Sending dtmf: 48 (0), at 192.168.0.101
>> Sending dtmf: 55 (7), at 192.168.0.101
>> Got RTCP report of 80 bytes
>> Sending dtmf: 42 (*), at 192.168.0.101
>> Sending dtmf: 50 (2), at 192.168.0.101
>> Sending dtmf: 49 (1), at 192.168.0.101
>> Sending dtmf: 48 (0), at 192.168.0.101
>> Sending dtmf: 55 (7), at 192.168.0.101
>> Sending dtmf: 52 (4), at 192.168.0.101
>> Sending dtmf: 50 (2), at 192.168.0.101
>> Sending dtmf: 42 (*), at 192.168.0.101
>> Sending dtmf: 55 (7), at 192.168.0.101
>>
>> It doesnt respond to anything!
>>
>> Not sure what to do.  The signalling is the same as told by any 
>> config guides for the Polycom phones, and this was working earlier.  
>> I also dont have the CVS-HEAD or anything that silly.
>>
>> any advice would be much apreciated.
>>
>> thanks!
>>
>> -C
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>