[Asterisk-Users] NetHDLC + PRI

[Chris Modesitt]

Is it possible to run NETHDLC and PRI signaling on the same 4 port T405P
card?

 

This is what I get when I try to start asterisk:

 

  == Parsing '/etc/asterisk/zapata.conf': Found

Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9435 setup_zap: Unknown signalling
method 'pri_cpe'

Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring
switchtype

Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring
pridialplan

Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9077 setup_zap: Signalling must be
specified before any channels are.

Mar 24 10:48:53 WARNING[2368]: loader.c:345 ast_load_resource: chan_zap.so:
load_module failed, returning -1

  == Unregistered channel type 'Tor'

  == Unregistered channel type 'Zap'

Mar 24 10:48:53 WARNING[2368]: loader.c:440 load_modules: Loading module
chan_zap.so failed!

 

 

My zapata.conf 

 

[channels]

 

echocancel=yes

 

echotraining=yes

 

musiconhold=default

 

signalling=pri_cpe

switchtype=national

pridialplan=unknown

group=1

relaxdtmf=yes

channel => 1-23

 

 

My zaptel.conf

 

span=1,1,0,esf,b8zs

span=1,2,0,esf,b8zs

bchan=1-23

dchan=24

nethdlc=25-48

 

loadzone = us

 

defaultzone=us

 

 

Any help would be much appreciated.

 

Chris.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050324/e40b8b06/attachment.htm