[Asterisk-Users] Registration issues with Sipura SPA-841

[David Hajek]

I have no such issues with Sipura/Asterisk. I don't think this is common to Sipura. Try 
Asterisk's SIP debug to see what happens when registration fails.

-D

GliTcH wrote:
> This is a common issue with all Sipura devices I've seen. I set the
> registration interval to 5 minutes, so that NAT doesn't interfere.
> I've done this with Cisco IP Phones, Cisco ATA Converters, and Sipura
> SPA-1001, SPA-2000, SPA-2100, and SPA-841's. All Sipura's have the
> same issue, 1 out of every 10 or so registrations will fail. I will
> suddenly see a Registration failed notice in the Asterisk console, 5
> minutes later the phone will go to register, and it works fine.  The
> right userid and password is programmed into the phone.  What this
> leaves is a 5 minute gap when the phone can not be called, if somebody
> calls that Sipura device within that 5 minutes, they will go straight
> to voicemail. It's damned annoying. I've tried this on several
> different interenet connections (At home (where I have DSL and Cable),
> at work, at my friends home, etc.) and with multiple Asterisk servers
> and different providers.  I've also confirmed this with a sister
> company we helped build, they've seen the same issues w/ Sipura's,
> they contacted Sipura about it and Sipura said it was a known issue
> they were working to resolve, but no ETA. Go figure. I was thinking
> about going to Linksys's PAP2-NA but I don't know much about it,
> except they're glorified Sipura's and may potentially have the same
> issue w/ Asterisk. I don't like how Linksys doesn't support them w/
> end users, doesn't offer firmware, makes them a pain to obtain, etc.
> etc.
> 
> I'm trying to investigate going to a different manufacturer, but I
> don't like the Cisco ATA-186's very much and they're too pricey, so I
> don't know where to go next. voipsupply has a pretty big collection,
> maybe I'll order 1 of each for testing.
> 
> We're about to deploy 150 converters to residential and business users
> and I can't even find one I like, jeesh. Don't say the IAXY, I only
> use IAX for Asterisk-Asterisk communication, not for end users.
> 
> 
> On Fri, 18 Mar 2005 16:41:55 -0800, Wolfgang S. Rupprecht
> <list+asterisk-users at lists.wsrcc.com> wrote:
> 
>>ih.ng at databrokers.net (Iassen Hristov) writes:
>>
>>>Anyone having problems with registration to * from a SPA-841?
>>
>>I have a spa-841 (firmware 3.1.1a) on my desk right next to me and it
>>registers just fine w. ~current asterisk (CVS-HEAD-03/16/05-08:43:40).
>>
>>The one problem I do notice that the phone is very touchy about the
>>cat-5 ethernet cable one uses.  The one that came with the phone works
>>just fine (of course).  Any of my 5 longer store-bought "cat5e" cables
>>don't work at all.  Tcpdump shows the phone registering and asterisk
>>answering, but the phone never hears the reply.  Might you be seeing
>>something like this?
>>
>>-wolfgang
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users