[Asterisk-Users] Ext matching problems

[C F]

What is your CLI output?


On Mon, 21 Mar 2005 15:03:14 -0400, Francisco Moreno
<fmoreno at netcomvoice.com> wrote:
> Hello everyone...
> 
> I'm trying to get up a testing pbx installation. Following instructions
> of what've read from the handbook and from asterisk's wiki, I wrote the
> dial plan as follows:
> [general]
> ;
> ;
> static = yes
> ;[globals]
> ;
> 
> [default]
> ;
> exten => 0,1,Answer()
> exten => 0,2,Playback(fcopba1)
> exten => 0,3,Hangup()
> exten => *0,1,Answer()
> exten => *0,2,Record(fcopba1:gsm)
> exten => *0,3,Playback(fcopba1)
> exten => *0,4,Hangup()
> include => extentions
> include => pasvalide
> 
> [extentions]
> exten => 1001,1,Dial(SIP/sipchan1001,10)
> exten => 1001,2,Voicemail(u1001)
> exten => 1001,3,Hangup()
> exten => 1002,1,Dial(SIP/sipchan1002,10)
> exten => 1002,2,Voicemail(u1002)
> exten => 1002,3,Hangup()
> exten => *,1,VoicemailMain(${CALLERIDNUM})
> ;exten => *,1,VoicemailMain()
> exten => *,2,Hangup()
> 
> [pasvalide]
> exten => _.,1,Answer()
> exten => _.,2,Playback(invalid)
> exten => _.,3,Playback(goodbye)
> exten => _.,4,Hangup()
> 
> --
> When I on asterisk's CLI try 'show dialplan' command this is what I
> get:
> *CLI> show dialplan
> [ Context 'pasvalide' created by 'pbx_config' ]
>   '_.' =>           1. Answer()                                   [pbx_config]
>                     2. Playback(invalid)                          [pbx_config]
>                     3. Playback(goodbye)                          [pbx_config]
>                     4. Hangup()                                   [pbx_config]
> 
> [ Context 'extentions' created by 'pbx_config' ]
>   '*' =>            1. VoicemailMain()                            [pbx_config]
>                     2. Hangup()                                   [pbx_config]
>   '1001' =>         1. Dial(SIP/sipchan1001|10)                   [pbx_config]
>                     2. Voicemail(u1001)                           [pbx_config]
>                     3. Hangup()                                   [pbx_config]
>   '1002' =>         1. Dial(SIP/sipchan1002|10)                   [pbx_config]
>                     2. Hangup()                                   [pbx_config]
> 
> [ Context 'default' created by 'pbx_config' ]
>   '*0' =>           1. Answer()                                   [pbx_config]
>                     2. Record(fcopba1:gsm)                        [pbx_config]
>                     3. Playback(fcopba1)                          [pbx_config]
>                     4. Hangup()                                   [pbx_config]
>   '0' =>            1. Answer()                                   [pbx_config]
>                     2. Playback(fcopba1)                          [pbx_config]
>                     3. Hangup()                                   [pbx_config]
> 
>   Include =>        'extentions'                                  [pbx_config]
>   Include =>        'pasvalide'                                   [pbx_config]
> 
> [ Context 'parkedcalls' created by 'res_features' ]
>   '700' =>          1. Park()                                     [res_features]
> --
> 
> Now, when I dial from any of the ext. to '0' It actually matches the
> '0', plays the goodbye message, but doesn't hangup but gets directly to
> the 'pasvalide' context. Same thing happens when I dial to the ext. 1002
> (the one that doesn't have voicemail), either it rings further than
> 10secs or it's busy, it does not hangup but gets straight to the
> 'pasvalide' context. As far as I understood, it should not happen, it
> should go through the dialplan leaving those context included at the end
> and in the orther they are included.
> 
> Am I forgetting something? Or there's something I'm just not seeing? Can
> someone please tell me why it's happening?
> 
> Thanks in advanced.
> 
> Francisco Moreno
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>