[Asterisk-Users] OT: VIA Mini-ITX, Asterisk, and hardware

[Master Abi]

I use the MII 1.2Ghz version with TE110P. No problems. Can do about 8-10 
ulaw to GSM, possibly more. Also used TDM400 that works fine. Note the 
MII 1.2 version cannot boot off the CF unless you use FreeBios. Use the 
EPIA MS version to boot from onboard CF.

C. Tomlinson wrote:
> Hi,
> 
> I run * on the first 800mhz version they released. I do not use any PCI
> cards, so cannot coment on that I'm afraid. It works fine for testing in the
> environment I use...but I haven't stressed it at all. I had to make a change
> to the makefile for the processor, but I doubt that is needed for the newer
> versions.
> 
> If I am right you made the cool little CF + flash disk * distro? I think
> they are an ideal pair. One of the new mini-itx boards comes with compact
> flash onboard, and has no builtin sockets except LAN and VGA. Very easy to
> make an embedded system.
> 
> I think any of them > 266 geode!
> 
> 
> C
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kristian
> Kielhofner
> Sent: 20 March 2005 21:19
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] OT: VIA Mini-ITX, Asterisk, and hardware
> 
> Hello everyone,
> 
> 	Does anyone out there have actual experience with running * on a 
> mini-itx board from VIA?  They look good, but I have some reserves 
> because of VIA's problems with PCI latency in recent years (audio 
> dropouts, wierd things happening).  I am looking at the EPIA CL-10000. 
> For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb 
> RAM, and a nice small (12 x 2 x 11) case (with 1 4cm fan)...  They look 
> like a good next step (or leap) up from a Soekris Net4801.  I know that 
> 1ghz C3 != 1ghz intel, but it's still probably better than a 266mhz Geode...
> 
> 	I would love to try this board with Sangoma A101's, te110p's, and
> even 
> some TDM4xx's, but if people out there already know that * is a bad fit 
> here, I probably won't even bother and look elsewhere.  Any tips, notes, 
> caveats, etc from anyone?  Anyone using any of the hardware I mentioned 
> with one of these boards?
> 
> Thanks!
> 
> --
> Kristian Kielhofner
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>