[Asterisk-Users] CAC Access Bank Manual

[Steven Critchfield]

On Fri, 2005-03-18 at 14:05 +0545, Vicky Shrestha wrote:
> Hi,
> 
> The asterisk configuration and the channel bank configuration are both set to 
> esf and b8zs. Howerver I am still getting the framing Error "Red and 
> blinking". zttool shows there are no alarms.
> 
> According to the manual, Framing Error (Red and Blinking )means
> 
> "Network T1 is out of frame (received signal cannot be framed to ESF or D5 as 
> configured by T1 Option switch 4)"
> 
> I tried with both DIP switch on and off, but no help.

> > >
> > > /etc/zaptel.conf
> > > =====================================
> > > span=1,1,0,esf,b8zs

Do you have the CAC set to provide timing to the line? If not, you need
to set your timing to 0 here so the TE410P card will provide timing.

Also, as a precaution, It is helpful to power cycle the machine when you
change timing.
-- 
Steven Critchfield <critch at basesys.com>