[Asterisk-Users] Newbie can't dial out to pstn

[Greg]

Hi,
I have just put in a tdm400p with 4 fxo modules and am trying to dial 
out from x-lite to dial my mobile phone just to test.

The output in the asterisk console is like this

Executing Goto("SIP/2002-239b", "mobile|61400039953|1") in new stack
     -- Goto (mobile,61400039953,1)
     -- Executing Goto("SIP/2002-239b", "localcall|61400039953|1") in 
new stack
     -- Goto (localcall,61400039953,1)
     -- Executing Dial("SIP/2002-239b", "ZAP/1/61400039953|60|r") in new 
stack
     -- Called 1/61400039953
     -- Zap/1-1 answered SIP/2002-239b
     -- Hungup 'Zap/1-1'
   == Spawn extension (localcall, 61400039953, 1) exited non-zero on 
'SIP/2002-239b'

It never tries to pick up the phone and dial out. I'm not sure if the 
config is correct, but I can easily dial between x-lite clients, just 
not get the pstn.

Can anyone see any glaring mistakes?

Any help is grealty appreciated.

Regards,
Greg

My extensions.conf part is this:

exten => _04XXXXXXXX,1,GoTo(mobile,61${EXTEN:1},1)

[localcall] ; local calls by PSTN ?is a fixed charge, voip is per minute
exten => _X.,1,Dial(ZAP/1/${EXTEN},60,r)
exten => _X.,2,Congestion
exten => _X.,3,Hangup
exten => _X.,103,Hangup
exten => _X.,104,Hangup
exten => _X.,105,Hangup

[mobile] ; Maybe be cheaper to route mobile calls differently to STD in 
some cases
exten => _X.,1,Goto(localcall,${EXTEN},1)

zaptel.conf
fxsks=1-4
loadzone=au
defaultzone=au
channels=1-4

zapata.conf
[channels]
 
busydetect=1
busycount=7
 
relaxdtmf=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
 
usecallerid=yes
 
echocancel=yes
echocancelwhenbridged=yes
 
rxgain=0.0
txgain=0.0
 
group=1
pickupgroup=1-4
 
immediate=no
 
context=incomingcall
 
signalling=fxs_ks
callerid=asreceived
channel=1-4