[Asterisk-Users] Cisco 7960 x Asterisk CVS-HEAD-03/13/05 - registration issues

[C F]

how are you telling the cisco what the password is? TFTP?
you will not see anything on * CLI unelss you do sip debug, this will
realy give you much more info (I guess in your case you will get a 403
forbbiden).


On Sun, 13 Mar 2005 22:38:46 +0900, Hermann Wecke <hermann at wecke.com> wrote:
> Rich Adamson wrote:
> > Looks like a couple of problems here. I don't believe the Cisco phone
> > handles md5, so remove that line.
> 
> As I told before, tried 3 different approaches:
> 1) password; md5;
> 2) password, no md5;
> 3) no password, no md5.
> 
> Only the third one worked. Trying to give SOME security, I added:
> deny=0.0.0.0/0.0.0.0
> permit=1.2.3.4/255.255.255.255
> to the config.
> 
> > In your sip.conf you have "nat=yes", but in the sip show peers it is
> > saying "Nat=N". That would imply that you need to "stop" asterisk
> > and restart it after making such changes. Reload does _not_ reread
> > all such changes, so don't use that until you have a solid understanding
> > of its use.
> 
> The config was reloaded using "sip reload" and by stoping and restarting
> asterisk. Both returned the same Nat=N. No changes noticed.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>