[Asterisk-Users] RE: [Asterisk-Dev] SetVarCDR

[Robert Rozman]

Hi,

could anyone provide any working examples? I have same problem, I do 
redirect to s-${Dialstatus} when making outgoing calls and I also get s-.... 
into CDRs.

Thanks,

Rob.

----- Original Message ----- 
From: "William M. Sandiford" <wsandiford at DURHAMTELECOM.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Sunday, March 13, 2005 5:19 AM
Subject: [Asterisk-Users] RE: [Asterisk-Dev] SetVarCDR


I don't know...now I have a _X. in my CDR.


-----Original Message-----
From: Matthew Boehm [mailto:mboehm at cytelcom.com]
Sent: Saturday, March 12, 2005 8:05 PM
To: Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
Subject: Re: [Asterisk-Dev] SetVarCDR


You must have some fux0red config 'cause using _X. works fine here. I 
haven't had an 's' in my CDRs for over several months now.

(continue this on the -users list.)

-Matthew


> From: "William M. Sandiford" <wsandiford at DURHAMTELECOM.com>
> Reply-To: "Asterisk Developers Mailing List
> <asterisk-dev at lists.digium.com>" <Asterisk-Dev at lists.digium.com>
> Date: Sat, 12 Mar 2005 13:41:30 -0500
> To: Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
> Subject: RE: [Asterisk-Dev] SetVarCDR
>
> Yes, but putting showing s in the dst is not what I want, I'm trying
> to alter that.  Also your suggestion of using _X. didn't work either.
>
>
> -----Original Message-----
> From: Matthew Boehm [mailto:mboehm at cytelcom.com]
> Sent: Saturday, March 12, 2005 11:20 AM
> To: Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
> Subject: Re: [Asterisk-Dev] SetVarCDR
>
>
> *buzzer* "That's the sound I make when somebody lies to me."
>   - Dr. Cox, Scrubs
>
> I replied to your post on the -users list about this. Showing 's' in
> the dst is programaticly correct behavior.
>
> -Matthew
>
>
>> From: "William M. Sandiford" <wsandiford at DURHAMTELECOM.com>
>> Reply-To: "Asterisk Developers Mailing List
>> <asterisk-dev at lists.digium.com>" <Asterisk-Dev at lists.digium.com>
>> Date: Fri, 11 Mar 2005 18:30:03 -0500
>> To: Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
>> Subject: RE: [Asterisk-Dev] SetVarCDR
>>
>> This was asked to the -users list with no replies.  Since the
>> original post came from the CVS list and was obviously a recent
>> development change, I thought this list was appropriate.  My
>> apologies if it was not.
>>
>> Out of curiosity, what are CDR variables for then?  Are they
>> read-only?
>>
>> Regards,
>> Bill
>>
>> -----Original Message-----
>> From: Tilghman Lesher [mailto:tilghman at mail.jeffandtilghman.com]
>> Sent: Friday, March 11, 2005 6:07 PM
>> To: Asterisk Developers Mailing List
>> Subject: Re: [Asterisk-Dev] SetVarCDR
>>
>>
>> On Friday 11 March 2005 16:40, William M. Sandiford wrote:
>>> I found a reference to the application SetVarCDR in the following
>>> post but I don't seem to have this available to me in my version of
>>> *.
>>
>> This is a -users question.  Please do not post usage questions to the
>> developers list.
>>
>>> I would like to change the value of the src and dst variables in the
>>> CDR as I sometimes find that they don't have entirely accurate
>>> information.  For example my dst field quite often has a value of
>>> "s" because I do my call processing in the s extension.  This is no
>>> good to me.
>>
>> This isn't what CDR variables are for.  In fact, unless you have
>> coded your own custom cdr_*.c module, you probably shouldn't be using
>> them at all (at least until somebody codes a generic implementation).
>>
>> --
>> Tilghman
>> _______________________________________________
>> Asterisk-Dev mailing list
>> Asterisk-Dev at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-dev
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005
>>
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005
>>
>> _______________________________________________
>> Asterisk-Dev mailing list
>> Asterisk-Dev at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-dev
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev


_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users