[Asterisk-Users] DVG-1120 questions

[lists at spirestudios.com]

I'm setting the caller ID info in extensions.conf when it rings the SIP
device from an incoming IAX connection.  The caller ID has no quotes,
verified by watching the debug info through the console of the SIP device.
 Outgoing caller ID from the SIP to the PSTN network works fine.

> lists at spirestudios.com wrote:
>
>> I upgraded a DVG-1120M to a DVG-1120S.  Everything works great, but I'm
>> having some caller ID issues on incoming calls sent to the SIP device.
>> Using debug on the device, the caller ID looks fine - just as I set it
>> in
>> Asterisk.  However, the phone is showing "CID TRANSMISSION ERROR".
>> Should
>> I check the RX and TX gain levels?  Try another phone?  Any ideas would
>> be
>> much appreciated.
>
> Make you don't have quotes in your CallerID string.
>
> callerid=Robert Dobbs <667>
>
> rather than
>
> callerid="Robert Dobbs" <667>
>
> --
> Always do right. This will gratify some people and astonish the rest.
> Mark Twain
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>