[Asterisk-Users] Broadvoice Multiple "lines" {Scanned}

[David Shaw]

I also have multiple line with Broadvoice. I would like to have each
incoming line ring a different extension and configure an internal user
to use his or her own broadvoice line..

Here is my sip.conf

register =>
XXXXXXXXXX at sip.broadvoice.com:password:XXXXXXXXXX at sip.broadvoice.com


register =>
AAAAAAAAAA at sip.broadvoice.com:password:AAAAAAAAAA at sip.broadvoice.com

[broadvoice1]
type=peer
username=XXXXXXXXXX
fromuser=XXXXXXXXXX
authuser=XXXXXXXXXX
secret=password
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
context=from-broadvoice1
dtmfmode=inband
disallow=all
allow=ulaw
canreinvite=no
nat=no

[bv-in-1]
type=friend
host=sip.broadvoice.com
context=from-broadvoice1
dtmfmode=inband
canreinvite=yes
nat=no
allow=ulaw

[broadvoice2]
type=peer
username=AAAAAAAAAA
fromuser=AAAAAAAAAA
authuser=AAAAAAAAAA
secret=password
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
context=from-broadvoice2
dtmfmode=inband
disallow=all
allow=ulaw
canreinvite=no
nat=no

[bv-in-2]
type=friend
host=sip.broadvoice.com
context=from-broadvoice2
dtmfmode=inband
canreinvite=yes
nat=no
allow=ulaw

so on so on

But all incoming calls on Broadvoice uses extensions.conf [broadvoice4]
or what evers the last line for broadvoice.


On Wed, 2005-03-09 at 18:53 -0600, James Taylor wrote:
> I configured this once now I forgot what I did.
> 
> Two Broadvoice accounts.
> Incoming is simple - just use the phone numbers.
> 
> Outgoing:
> 
> Dial out on a specific line
> and/or
> set up the groups and select the other "line" if the first one is busy?
> 
> 
> -- 
> James Taylor
> MetroTel
> 3505 Summerihll Road
> Suite 11
> Texarkana, Texas  75503
> 903-793-1956
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>