[Asterisk-Users] AAH 0.06 - IAX Connection Over NAT Firewall

[Wiley Siler]

Yep.  Of course, problem is the provider gave the settings and the deny
statement was part of it.  Ooops to them i guess.
 
Thanks,
Wiley
 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C.
Tomlinson
Sent: Friday, March 11, 2005 4:32 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] AAH 0.06 - IAX Connection Over NAT
Firewall



As I understand it if you use that deny statement, all calls will be
disallowed, hence why you couldn't get any incoming calls.

If you add an allow line with the VOIP providers IP that it send the
call from, you can then use that line to disallow everything else.

 

It is just a security feature really.

 

C

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: 11 March 2005 07:23
To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk
Users Mailing List - Non-Commercial Discussion; Asterisk-Users at Lists.
Digium. Com
Subject: RE: [Asterisk-Users] AAH 0.06 - IAX Connection Over NAT
Firewall

 

OK.  I removed the deny statement they have me using and now I can get
incoming calls.

 

Do I need the deny 0.0.0.0/0.0.0.0 statement?

 

Thanks,

Wiley

 

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Wiley Siler
Sent: Thu 3/10/2005 11:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion;
Asterisk-Users at Lists. Digium. Com
Subject: [Asterisk-Users] AAH 0.06 - IAX Connection Over NAT Firewall

Hello all,

I am having trouble getting my IAX based Voip provider setup.  Any
pointers are welcome.

So here is the deal.  I am registered up and I can make outgoing calls
but incoming calls fail.
Configs all look good I thought.

My PBX is behind our firewall with a direct NAT of one to one for an
external IP. 
IAX port is forwarded UDP and TCP to the internal IP.

* shows good registration and Ips and ports show solid.

Within my AAH I have the registration like the provier said to do.  I
get absolutely nothing on the incoming.  IAX2 debug shows nothing on
incoming.  Just a fast busy.  Outgoing works perfectly however.

I have a defined DID in the AMP interface and verified it is written to
confs and have reloaded.

Can anyone tell me another way to verify that something is coming in?
Or did I just miss something on the whole IAX over NAT?

 

Thanks all,

Wiley

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/b65b6eca/attachment.htm