[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Peter Svensson]

On Fri, 11 Mar 2005, James Bean wrote:

> Whooppss had pri_cpe set, redid the debug as attached.
> 
> They seem the same but just in case.

Asterisk does not see anything coming in on the D channel. What does 
zttool say about the state of the link?

As I said before, if the card is an isdn card you need to use ccs 
signalling. Cas signalling is unusual, but possible, over an E1. Can you 
find out the model number of the E1 card in the Panasonic pbx?

Peter