[Asterisk-Users] QuadBRI ,TDM400 and SuSE9.2 (Sencond try)

[Manuel Antonio Casal Hernández]

Hi all, this time with the complete configuration files...

We need help with our SuSe9.2 asterisk box
We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone.
We have downloaded the bristuff (0.2.0-RC7j) and installed it without
problems.
once we downloaded and compiled asterisk, zaptel and all other stuff,
the module installation succed in this order:

modprobe zaptel
modprobe qozap
modprobe wcfsx

then the ztcfg output this:

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: D-channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: D-channel (Default) (Slaves: 12)
Channel 13: FXO Kewlstart (Default) (Slaves: 13)
Channel 14: FXO Kewlstart (Default) (Slaves: 14)
Channel 15: FXO Kewlstart (Default) (Slaves: 15)
Channel 16: FXO Kewlstart (Default) (Slaves: 16)

16 channels configured.

but when we start asterisk it stops at zapata.conf parsing:

[chan_zap.so] => (Zapata Telephony w/PRI)
    == Parsing '/etc/asterisk/zapata.conf': Found
Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get
parameters
Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to
register channel '1-2'
Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
    == Unregistered channel type 'Tor'
    == Unregistered channel type 'Zap'
Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module
chan_zap.so failed!


Any kind of suggestions or help will be welcome, We are stucked and
dessesperated with this issue...:(

Thanks very much in advance for your help, again.

------ zaptel.conf

#loadzone=no
#defaultzone=us
loadzone=nl
defaultzone=nl
# qozap span definitions
# most of the values should be bogus because we are not really zaptel

span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

bchan=1,2,4,5,7,8,10,11
dchan=3,6,9,12
fxoks=13-16

------ zapata.conf
;
; Zapata telephony interface
;
; Configuration file

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn

; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
;signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)

signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
;signalling = bri_net_ptmp

pridialplan = local
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00

echocancel = yes

context=RDSI
group = 1
; S/T port 1
channel => 1-2

; S/T port 2
channel => 4-5

; S/T port 3
channel => 7-8

; S/T port 4
channel => 10-11

switchtype =fxo_ks
context=EXTENSIONES
group = 2
channel =>13-16

------ extensions.conf

[RDSI]
exten => _X.,1,Dial(ZAP/g2/${EXTEN},60)
exten => _X.,2,Hangup

[EXTENSIONES]
exten => _X.,1,Dial(ZAP/g1/${EXTEN},60)
exten => _X.,2,Hangup

; if the called party is busy
exten => _X.,102,Playtones(busy)
exten => _X.,103,Wait(10)
exten => _X.,104,Hangup

; if all zaptel channels in that group are in use
; or the D channels are down
exten => _X.,202,Playtones(congestion)
exten => _X.,203,Wait(10)
exten => _X.,204,Hangup

------ asterisk output
[chan_zap.so] => (Zapata Telephony w/PRI)
    == Parsing '/etc/asterisk/zapata.conf': Found
Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get
parameters
Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to
register channel '1-2'
Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
    == Unregistered channel type 'Tor'
    == Unregistered channel type 'Zap'
Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module
chan_zap.so failed!

-- 

Manuel Casal Hernández
mach at e-sistemas.net
-----------------------------
Dep. Desarrollo y Consultoría

Sistem at s.NET
http://www.e-sistemas.net
info at e-sistemas.net
(T) 902 678 006