[Asterisk-Users] AAH 0.06 - IAX Connection Over NAT Firewall

[Wiley Siler]

OK.  I removed the deny statement they have me using and now I can get incoming calls.
 
Do I need the deny 0.0.0.0/0.0.0.0 statement?
 
Thanks,
Wiley

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Wiley Siler
Sent: Thu 3/10/2005 11:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk-Users at Lists. Digium. Com
Subject: [Asterisk-Users] AAH 0.06 - IAX Connection Over NAT Firewall



Hello all,

I am having trouble getting my IAX based Voip provider setup.  Any pointers are welcome.

So here is the deal.  I am registered up and I can make outgoing calls but incoming calls fail.
Configs all look good I thought.

My PBX is behind our firewall with a direct NAT of one to one for an external IP. 
IAX port is forwarded UDP and TCP to the internal IP.

* shows good registration and Ips and ports show solid.


Within my AAH I have the registration like the provier said to do.  I get absolutely nothing on the incoming.  IAX2 debug shows nothing on incoming.  Just a fast busy.  Outgoing works perfectly however.

I have a defined DID in the AMP interface and verified it is written to confs and have reloaded.

Can anyone tell me another way to verify that something is coming in?  Or did I just miss something on the whole IAX over NAT?

 

Thanks all,

Wiley

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/2a2f44c4/attachment.htm