[Asterisk-Users] Re: Paging using multiple sound cards

[Marios Andreou]

OK I'm probably confused on what you try to do so in this case just ignore the post.

BUT wouldn't be easier to install a softphone (X-lite on Win, or Kphone, or ....)
and register it with your asterisk using the PA extension.
By default the softphones are using the sound card (any supported sound card)

Usually you connect a headphone and a microphone to the sound card but instead of this you will connect your PA or any speakerphone
(Heck pass through an amplifier or your stereo or ...)
Then whenever you like to make a PA dial the extension of the softphone.!!!
Instead of hanging up put it on hold so it plays the MOH all the time (check the timeouts)

This will cost around $0.00.

I'm probably missing something here or it is the simplest solution that no-one is looking for ;)

Multiple zones?? The same with multiple softphones. They can be on the same system and set them up using different sound cards for
their output.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeff G
Sent: Thursday, March 10, 2005 2:23 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Re: Paging using multiple sound cards

Why *wouldn't* I bother? Using $5-$10 sound cards would be a much cheaper,
professional, and more permanent solution than having a couple hacked phones
laying near the PA system. Just trying to keep the setup clutter and problem 
free,
as well as as cheap as possible.

I'm not a developer, but I don't think it'd be too much of a pain to program
the console channel driver to provide 2 output-only channels from a single
stereo sound card. Maybe I'm wrong?

Also - For another scenerio, I'd like to know if anyone has the MOH music
playing full time, for both Asterisk and outputting to the sound card, so I 
can
use the same music for a hardware PBX? I was thinking using a Slimserver
might be the answer, but if the music is already set up in Asterisk, why not
have it output it as well.

Jeff


>
> Why would you bother 2 x grandstream handsets, 15 mins to open them up,
> cut the cable and solder a plug or connect them to your amps and problem
> solved.
>
>
>
> $40-$50 each channel - lol you can have 10 zones :-)
>



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users