[Asterisk-Users] tdm400p and dell 2600 poweredge

[Dennis Webb]

I'm using tdm400's here and was curious about the irq misses.  My zttool
won't compile for some reason and I haven't researched it enough to be
worried about it yet.  Is zttool the way to diagnose the irq issue and
does zttool work with the tdm400 boards.  I don't have a shared irq
issue but here's the output of /proc/interrupts.  is there anything else
to check?

cat /proc/interrupts
           CPU0       CPU1
  0:  172897707          0    IO-APIC-edge  timer
  1:         11          0    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  8:          2          0    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 11:          0          0   IO-APIC-level  ohci_hcd
 12:         50          0    IO-APIC-edge  i8042
 14:         76          1    IO-APIC-edge  ide0
 18:  172811936          0   IO-APIC-level  wctdm
 20:  172802850          0   IO-APIC-level  wctdm
 22:  172807318          0   IO-APIC-level  wctdm
 24:  172791427          0   IO-APIC-level  wctdm
 26:     361826          0   IO-APIC-level  cciss0
 28:   11479585          0   IO-APIC-level  eth0
 31:     293841          0   IO-APIC-level  aic7xxx, aic7xxx
NMI:       5767          0
LOC:  172894484  172894411
ERR:          0
MIS:          0

On Thu, 2005-03-10 at 11:11, Jeb Campbell wrote:

> Grant McInnes wrote:
> > Hi all:
> > 
> > I've been developing and testing on a tdm400p card and it's been going
> > well.
> > 
> > As you probably know, the tdm400p needs an ide power supply, but the
> > dell poweredge 2600 that this card is destined for eventually has all
> > the power supplied on the backplane with no ide cables.
> 
> I used a molex splitter from another drive.
> 
> On the topic of the dell 2600, I had to change servers as I could not 
> get the t100p and tdm400p on their own irq's (It also had the raid card 
> which is not supported in the new megaraid driver, but that is another 
> story).  Anyway in the bios, I could only set the irq to share with the 
> raid controller or the gigabit ethernet.  I was getting tons of irq 
> misses which caused frame slips (and bad echo) on the t1.
> 
> Anyway, please let me know how it goes and watch for irq misses.
> 
> ** This was a while back, and it could have been a 2650, so please 
> verify this for yourself **
> 
> Jeb Campbell
> jebc at c4solutions.net
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050310/337a6d31/attachment.htm