[Asterisk-Users] DTMF out to Cell Phone

[James Taylor]

Try setting your dtmfmode=inband in your your sip/iax/zap configs.
This forces them to default to "inband".
You can then overide with "info" or whatever you need in other contexts.

James

On Wed, 09 Mar 2005 12:53:02 +0200, Mark Elkins <mje at posix.co.za> wrote:

> On Tue, 2005-03-08 at 14:16 -0500, John Fullington wrote:
>> I set up a monitoring system that calls my techs when a problem occurs  
>> on
>> one of our networks, everything works fine unless  asterisk calls a cell
>> phone in which case the tech can not respond using dtmf. It works fine  
>> if
>> the tech call in but not if asterisk call a tech's cell phone. Anyone  
>> one
>> have any suggestions?
>
> The application sounds interesting. Any chance you can email more about
> what you are actually doing?  (code?)
>
> It sounds like your problem has nothing to do with mismatching Codec's
> or how the DTMF is being sent... etc...
>
> I have an Asterisk installation with BRI and with a premicell attached
> to an analogue interface (Premicell=fixed cell phone with analogue
> 2-wire interface that gives dial tone - like a trunk line)
>
> Perhaps I can then confirm your problem - or help with a solution?



-- 
James Taylor
MetroTel
3505 Summerihll Road
Suite 11
Texarkana, Texas  75503
903-793-1956