[Asterisk-Users] Re: Polycom IP600 Phantom Ringing

[Noah Miller]

> 1.4.1 over here.

Just to rule out all the possibilities - it's not MWI is it?

http://www.voip-info.org/tiki-index.php? 
page=Getting%20MWI%20on%20Polycom%20Phones%20to%20work%20with%20Asterisk

It shows up as a little "half-ring".  It should also be accompanied by  
the top LED flashing, and a stutter on the dialtone.




>
>
> Jerry wrote:
>> Never had any of my 100 or so act like that. What version of code are
>> you running? I think 1.4.1 is the latest.
>>
>>
>> On Mar 8, 2005, at 8:05 PM, Ben Ruset wrote:
>>
>>> Hello list:
>>>
>>> I have a very odd problem. Seemingly randomly, my Polycom IP600  
>>> phones
>>> will ring without a call being placed to it.
>>>
>>> That is to say, a random phone will ring. Nothing shows up under
>>> Caller ID. Even the buttons that light up to show an incoming call do
>>> not light up. If you pick up the handset, you can hear the phone ring
>>> through the speaker.
>>>
>>> Hanging up the phone makes it stop ringing. Then, sometime later, it
>>> will happen on another random extension.
>>>
>>> Is this a common problem? Where can I look to start diagnosing this?
>>>
>>> Thanks!
>>> -ben