[Asterisk-Users] Connect asterisk on classic pbx with T100P card

[Peter Svensson]

On Wed, 9 Mar 2005, bagattin jerome wrote:

> Hi, 
> 
> I try to connect my asterisk box with a classic pbx
> (Siemens).
> I have a T100P E1 card.

The T100P is a T1 card, not an E1. Did you mean to write E100P? 

> modprobe zaptel and wct1xxp ok
> ztcfg -vv  ok
> 
> I can run asterisk and show the channels but the led
> still flash red
> 
> My zaptel.conf :
> 
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> bchan=17-31
> dchan=16

Is the pbx set to provide timing? If not, you need to change to span=1,0,0....
Also, check that crc4 is enabled on the pbx as well.

Peter