[Asterisk-Users] What combination of pwlib and openh323 are

[Peter Illmayer]

Hi Mark

Funny you should ask this question, I just spent yesterday integrating
building asterisk with h323 support to connect to a Cisco call agent.....I
cant say if it will work for you but it compiles and loads nicely !  I will be
testing this evening....

# cd /root
# wget http://www.voxgratia.org/releases/pwlib-Pandora_release-src-tar.gz
# wget http://www.voxgratia.org/releases/openh323-Pandora_release-src-tar.gz
# tar zxvf pwlib-Pandora_release-src-tar.gz
# tar zxvf openh323-Pandora_release-src-tar.gz
# cd /root/pwlib
# ./configure && make opt && make install
# cd /root/openh323
# ./configure && make opt && make install
# echo ‘/root/pwlib/lib’ >> /etc/ld.so.conf       # may not be req’d
# echo ‘/root/openh323/lib’ >> /etc/ld.so.conf    # may not be req’d
# /sbin/ldconfig


That gets pwlib and openh323 installed.....

Are you going to install ztdummy ?  You will need to do this if you dont have
a digium card installed.. If you need more help, drop me a message....

# cd /usr/src
# export CVSROOT=:pserver:anoncvs at cvs.digium.com:/usr/cvsroot
# cvs login (when prompted for a password, enter 'anoncvs')
# cvs -z4 checkout -D '2004-12-22' zaptel libpri asterisk


That gets the cvs version of Asterisk that works :-)You want this **specific**
version of asterisk

# cd /usr/src/asterisk/channels/h323
# make
# cd /usr/src/asterisk
# make
# make install


That will build the h323 support for asterisk.  If I can help any furthur,
drop me a mail.. I spent most of yesterday sorting it and was rewarded at
midnight with a "loading asterisk" :-)

Regards..Pete







> Date: Tue, 8 Mar 2005 11:41:19 +0800
> From: <replies at datamerge.com.au>
> Subject: [Asterisk-Users] What combination of pwlib and openh323 are
> 	required to get Asterisk-oh323 v0.7.1 to compile
> To: <asterisk-users at lists.digium.com>
> Message-ID: <ROCKETS7sBdxkiiZIHd000000d3 at smtp.datamerge.com.au>
> Content-Type: text/plain; charset="us-ascii"
> 
> Hi there
> 
> I have Asterisk running beautifully on our test server. Over the 
> past few days I have been tearing my hair out trying to compile 
> various versions of asterisk-oh323 on various versions of pwlib and openh323.
> 
> pwlib is now up to 1.8.3 and openh323 is now 1.15.2 stable.
> asterisk-oh323 is currently 0.7.1
> 
> I have tried these three with many errors.
> 
> I have tried 0.7.1 with pwlib 1.5.2 and openh 1.12.2 with no luck.
> 
> I have tried asterisk-oh323 1.5.10 with pwlib 1.5.2 and openh323 and 
> I still get errors. From the mailing list I have gleaned that this 
> version of asterisk-openh323 won't work with the latest asterisk 
> anyway, yet the readme in asterisk-oh323 says to use this version 
> with the aforementioned versions of pwlib and openh323.
> 
> I can't find the versions of pwlib and openh323 recommended in the
> asterisk-oh323-0.7.1 readme.
> 
> The pwlib and openh323 projects always build without error. Asterisk 
> built without errors and most everythings else. I am running a very 
> basic Fedora Core 2 installation.
> 
> What I would like to know is what is the recommended known good combination
> to use of asterisk-oh323, pwlib and oh323. Once I have a combination 
> that should work, I can then ask more intelligent questions on how 
> to get it to build properly if I still have errors.
> 
> Help greatly appreciated.
> 
> Regards
> 
> Mark Dutton